Technical information

20 Mechanical Installation AccuLazr
™
AL5010 Product Line Manuals
Raster Setup
The Adjustable Raster version of the AccuLazr™ AL5010 Laser barcode
scanner requires some extra care during installation. The procedures below
will help achieve the coverage needed for your application while ensuring the
maximum read rate.
AL5010 Adjustable Raster Installation
Mount the Scanner
1. Mount the scanner according to specifications.
2. Tilt the scanner back at a 15-degree angle.
0.
Set Up the Raster Sweep
1. Start the user interface (See chapter 5, Setup).
2. In Modify Settings > Barcode, select Code 128. The test barcode
label is a 12 character, code 128.
3. Print out or photo copy the barcode test label sheet found at the end
of this appendix.
4. Place the barcode test labels on a test box.
Accu-Sort Systems, Inc. 03-AL5010_Mechanical_Installation_R20.doc