Technical information

22 Mechanical Installation AccuLazr
™
AL5010 Product Line Manuals
7. In the user interface, navigate to Modify Settings > Raster.
8. Type -20 in the Upper Sweep and Lower Sweep text fields.
NOTE: This will stop the raster from
sweeping and lock it in position at the -20
degrees.
9. Adjust the height of the scanner, so that at -20-degrees, the scan
line is aligned with the lowest barcode mark on the test box.
10. With the laser line intersecting the barcode, put the scanner into test
mode using the user interface. To do this, navigate to Diagnostics >
Monitor.
11. On the Monitor screen, click Start Test Mode.
12. Check the read quality on the monitor. The quality should be 100%.
Accu-Sort Systems, Inc. 03-AL5010_Mechanical_Installation_R20.doc