Technical information

AccuLazr
™
AL5010 Product Line Manuals Mechanical Installation 27
Dimensions and Clearances
The overall dimensions of the AL5010 when the Universal Mounting Bracket
(UMB) is used are shown on the mechanical specification drawings provided
in the drawings folder of the documentation CD. This section also includes
drawings without the UMB.
The reader is a sealed, unventilated unit. No specific clearance is required
for the purpose of cooling. However, ease-of-access should be considered
when locating the mounting position.
NOTE: For installation, maintenance and service reasons, approximately
8-12 inches [203-305 mm] of clearance is recommended.
Attaching the Mounting Base
If your application is not using the universal mounting bracket (UMB), mount
the mounting base to any flat surface with the two mounting screws provided.
The length of the screws must not be greater than 0.5 inch [12.7 mm] plus
the thickness of the mounting surface.
Use the following diagram as a reference to create a mounting template.
Mounting Base Dimensions (not actual size)
03-AL5010_Mechanical_Installation_R20.doc Accu-Sort Systems, Inc.