Technical information

36 Mechanical Installation AccuLazr
™
AL5010 Product Line Manuals
To install your optional I/O module(s):
1. Remove the cover to gain access to the printed circuit board.
2. The I/O modules may be plugged into locations I/O 1 through I/O 4.
These locations run left-to-right, as shown on the circuit board
silkscreen.
3. Plug the appropriate I/O module directly into the interface module’s
circuit board.
4. Using a screwdriver, secure the I/O module by tightening the captive
screw (that goes through the module) into the circuit board. DO NOT
over-tighten screw.
Installing an I/O Module
Accu-Sort Systems, Inc. 03-AL5010_Mechanical_Installation_R20.doc