Technical information

AccuLazr™ AL5010 Product Line Manual Electrical Installation 55
Check Installation
After completing the installation of your AL5010:
 Confirm that the reader has been properly installed mechanically and
electrically. Use the Installation Sequence at the beginning of this
chapter and your application specifications to check your installation.
 Configure the reader’s parameters to meet the needs of your application.
(See Chapter 5 and online help for details.)
 See Chapter 5 and 6 for details regarding first-time startup and an
operations checklist.
Check installations using Basic Interface Module:
1. Apply power to the interface module.
2. Check the following:
 Power ‘on’ (POWER LED)
 Trigger photoeye operation (TRIGGER LED)
3. Finger-tighten all water-tights.
4. Install cover.
5. Tighten four Phillips screws.
Do not over tighten.
04-AL5010_Electrical_Installation_R20.doc Accu-Sort Systems, Inc.