Technical information

70 Setup AccuLazr™ AL5010 Product Line Manual
Multiple Bar Code - If disabled, a multiple bar code condition will be reported
as a “Read” of the first bar code reported. Otherwise, the specified
“repeated character” or the user-specified message is sent.
Category 2: Match, No Match, No Match Read
These conditions are IN ADDITION to the conditions specified in Category 1.
If a condition in both categories is met, these messages will be appended. If
you desire to only generate a message based on Category 2 conditions, all
messages in Category 1 should be disabled.
Match - If the bar code matches any of the match codes, this message is
sent. Options include sending the bar code or a user specified message.
No Match - If the bar code does not match any of the match codes (or was a
no-read), this message is sent. Options include sending a “repeated
character” or a user specified message.
No Match Read - If a valid bar code was read, but it does not match any of
the match code, this message is sent. Options include sending the bar code
or a user specified message.
Category 3: Append QQ, Heart Beat Message, and Heart Beat Timeout
Append QQ (code quality) to message (checkbox) - When selected a two
digit “code quality” indication (number from 00 to 99) is appended to the bar
code message. The code quality value is separated from the message with
the specified separator.
Heart Beat Message - When enabled, if no other message is sent for the
time period specified in Heart Beat Time Out, the specified heart beat
message string is sent. A time-out of zero disables the heart beat message.
Heart Beat Time Out (0-30,000 ms) - 0 = Disable Heart Beat Message, 1-
30,000 = Delay before sending Heart Beat Message
Append Distance to Message - allows the AL5010’s measured approximate
distance from the scanner to the bar code read to be in the transmitted
message.
See also: Modify Settings > Serial Communications in Appendix C.
Accu-Sort Systems, Inc. 05-AL5010_Setup_R20.doc