Technical information

AccuLazr™ AL5010 Product Line Manual Setup 79
• Should be at least as long as Start/Stop character. If short Start/Stop
character, use the length of one data character plus the start/stop
character (e.g.;I2 of 5)
• In this subroutine, any group of elements less than the min trans
setting is discarded or ignored.
Laser /Laser 2 DOF: Near Dist (in)/Far Dist (in)
• These options filter out any transitions beyond the entered values.
Any transition (including bar codes) seen beyond these values are
not placed into memory to be processed by the reader.
This also includes valid bar codes.
• As an example the above view shows the closest a bar code can be
processed is six inches for Laser 1 and 27 inches for laser 2. Any
bar code found closer then these values will be filtered out and the
reader will report a No-Read.
Bar Code Size
• Min Narrow Element (mils)/Max Narrow Element (mils)/Maximum Tilt
• These entries are used to identify valid Quite Zones.
DRX Settings
The DRX settings typically will not need to be modified.
Transmit QQ
The Minimum QQ is the smallest allowable QQ value for a code to be
transmitted.
The Maximum QQ forces the transmission of a code after the maximum QQ
value is reached.
See also: Modify Settings > Advanced in Appendix C.
05-AL5010_Setup_R20.doc Accu-Sort Systems, Inc.