Technical information

AccuLazr™ AL5010 Product Line Manual Setup 81
Save / Retrieve
Use Save/Retrieve to save all the settings to the scan head and backup the
settings to the mounting base and/or file.
To use the save/retrieve functions:
1. Select an Action.
Based on the action selected, either the From or To drop-down list
becomes available.
2. Select the required location (either From or To).
3. Follow any additional prompts.
For example: If Retrieve from File is selected, use the Browse function
provided to locate the file.
4. Click OK. 0.
Default
Use to return the reader’s parameters to the hard-coded "default" values built
into the reader software.
USEFUL TIP: Selecting Default will return your reader to the
default factory settings. Since your reader may already be
configured for your application, it is recommended that you
ALWAYS Save to Disk before using the default function.
Retrieve from Base
Use to retrieve the parameters stored in the reader’s mounting base. This is
especially useful when it becomes necessary to load the correct parameters
to a replacement reader module.
Retrieve from File
Use to retrieve a parameters set from a specific file name and location on
your computer.
Save to Base
Use to save the current set of parameters to the mounting base as a backup
copy.
Save to File
Use to specify a file name and location to store the current parameter
settings on your computer.
Save to Reader
Use to save the current set of parameters to the reader. Parameters saved in
the reader are the parameters used during normal operations.
Reboot AL5010
Click Reboot to reinitialize the scanner.
See also: Save / Retrieve in Appendix C.
05-AL5010_Setup_R20.doc Accu-Sort Systems, Inc.