Instruction manual

Matrix-2000™ Reference Manual

To cancel the Positioning function, press and hold the keypad button at any time during the

procedure: the F1 LED will stop blinking and Matrix-2000™ will emit a long low pitched beep.

yellow

Positioning (F1)

Figure 8 – Positioning Function

Restore Default (Optional)

At any time you can use the Restore Default procedure to return the reader to the factory

default settings.

1. Enter the Restore Default function (F3) by pressing and holding the push button until both

the F1 and F2 LEDs are on: Matrix-2000™ also beeps three times.

2. Release the button to perform the Restore Default function.

= F1 yellow +

F2 green

Restore Default (F3)

Figure 9 – Restore Default Function