Instruction manual

RAPID CONFIGURATION

STEP 4 – INSTALLING VISISET™ CONFIGURATION PROGRAM

VisiSet

™

is a Datalogic reader configuration tool providing several important advantages:

• Autolearning Wizard for rapid configuration and for new users;

• Defined configuration directly stored in the reader;

• Communication protocol independent from the physical interface allowing to consider the

reader as a remote object to be configured and monitored.

To install VisiSet™, turn on the PC that will be used for the configuration, running

Windows 98, 2000/NT, XP or Vista, then insert the VisiSet™ CD-ROM, wait for the CD to

autorun and follow the installation procedure.

This configuration procedure assumes a laptop computer, running VisiSet™, is connected to

the reader's auxiliary port.

After installing and running the VisiSet™ software program the following window:

Figure 10 - VisiSet™ Opening Window

Set the communication parameters from the "Options" menu. Then select "Connect", the

following window appears:

Figure 11 - VisiSet™ Main Window After Connection

The Autolearning Wizard option is advised for rapid configuration or for new users. It allows

reader configuration in a few easy steps.