Instruction manual

RAPID CONFIGURATION
1
The reader flashes once acquiring the image and auto determines the best exposure and
gain settings. If the code symbology is enabled by default, the code will also be decoded.
5. If the code symbology is not enabled by default, select a Code Setting Mode choice and
press the "Code Setting" button.
The Autolearning Result section of the Autolearning Wizard window shows the parameter
settings and the code type results.
6. Select a Saving Options choice and press the "Save" button.
6
7. Close the AutoLearning Wizard.
NOTE
If your application has been configured using the VisiSet™ Autolearning
Wizard, your reader is ready. If necessary you can use VisiSet™ for advanced
reader configuration.
11