Instruction manual

Matrix-2000™ Reference Manual

2.2 DESCRIPTION

Some of the main features of this reader are given below:

• Decoding of most popular linear and stacked barcodes, 2D code symbologies and postal

codes

• Omni-directional reading

• Direct or 90° reading Window

• Quick installation without PC by using Autolearning button and F1, F2 LEDs

• Image Windowing function

• Frame rate up to 60 frames/sec (3600 frames/min)

• Up to 200 readable codes in the same reading phase

• Calibration Tool to verify exact code positioning in the Field of View and to maximize the

reading performance

• Ethernet interface (Matrix-21XX only) with TCP/IP socket for reader parameter

configuration, data and image transfer, HTTP server, FTP and mail client, etc.

• Windows-based VisiSet™ software to configure the reader parameter via PC serial or

Ethernet interface

• Code quality assessment according to ISO/IEC 16022, ISO/IEC 18004, ISO/IEC 15415,

ISO/IEC 15416 and AS9132 and AIM DPM standards.

• Different operating modes to suit various application requirements

• User-defined database of Image Acquisition Settings (parameter sets)

• Match Code option with a user-defined match code database

• Diagnostic software tools

• 2 serial communication interfaces

• General purpose optocoupled I/Os

• Supply voltage ranges from 10 to 30 Vdc

The reader is contained in a magnesium alloy housing; the mechanical dimensions are 121 x

73 x 57 mm and it weighs about 380 g.

The protection class of the enclosure is IP64 for all 20XX models; therefore the reader is

particularly suitable for industrial environments where protection against harsh external

conditions is required.

Electrical connection of Power, Host interfaces and I/O signals is provided through a 25-pin

connector (see Figure A, 9). In addition there is a 9-pin Auxiliary interface connector for

reader configuration (see Figure A, 10). A standard Ethernet RJ45 connector is present on

Matrix-21XX models (see Figure A, 11).