Instruction manual

MATRIX-2000™ REFERENCE MANUAL

8 SOFTWARE CONFIGURATION

Software configuration of your Matrix-2000™ for static reading or simple code reading

applications can be accomplished by the Rapid Configuration procedure using the onboard

keypad Autolearning Configuration (which requires no external configuration program) or by

using the VisiSet™ Autolearning Wizard for easy setup. These procedures are described in

chapter 1.

For all other applications use VisiSet™ through the reader serial ports (or Ethernet port for

Matrix-21XX models only).

NOTE

Before using VisiSet™ via Ethernet, it is necessary to configure Matrix-

2000™ Ethernet port parameters using VisiSet™ via Main or Auxiliary serial

port (for further details refer to the VisiSet™ Help on line).

8.1 VISISET™ SYSTEM REQUIREMENTS

To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the

following:

• Pentium processor

• Win 98/2000, NT 4.0, XP or Vista

• 32 MB Ram

• 5 MB free HD space

• one free RS232 serial port with 115 Kbaud

• SVGA board (800x600) or better using more than 256 colors

8.2 INSTALLING VISISET™

To install VisiSet™, proceed as follows:

1. Turn on the Laptop or PC that will be used for configuration (connected to the Matrix-

2000™ communication ports).

2. After Windows finishes booting, insert the CD-ROM provided.

3. Launch VisiSet™ installation by clicking

Install.

4. Follow the instructions in the installation procedure.