Instruction manual

MATRIX 200™ REFERENCE MANUAL
8
Parameters to verify/mo
dify:
 Operating Mode Sets the parameters which customize the reader operating
mode starting from three main modes:
One Shot: acquires a single image based on the selected
value for the Acquisition Trigger and Acquisition Trigger
Delay.
Continuous: continuously acquires images with a rate up
to the maximum allowable frame rate per second for the
given sensor depending on the decoding time and the
Region of Interest settings.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger
and Acquisition Trigger Delay. The Reading Phase-ON
and Reading Phase-OFF events mark respectively the
beginning and end of the reading phase.
 Calibration Calibrates the acquisition parameters to maximize the
reading performance (see par. 8.4.3).
 Communication Configures the parameters relative to each serial port
regarding the transmission, message formatting and string
receiving.
Any change to the VisiSet™ communication port
parameters (baud rate, data bits, etc.) is effective as soon
as the reader is disconnected from VisiSet™.
 CBX Gateway Sets the parameters related to the External Host Interface
Module through the CBX500 and to its communication
channels.
 Display Sets the Display language and Layout of the BM150
Display when using the CBX500 connection box.
 Diagnostics Enables various diagnostic messages, formatting and
actions.
 Reading System Layout Allows configuring the device according to the desired
layout: Standalone, ID-NET™ or Master/Slave RS232
 Image Processing Sets the image processing parameters shared by all
available symbologies.
 1D & 2D, Postal Codes
Sets the characteristics of the code symbologies to be
read.
 Data Collection Defines the code-collection parameters and the output
message format.
 Digital I/O Configures the reader input/output parameters.
 Match Code Allows setting a user-defined code and relative parameters
to which the read code will be compared (matched).
 Miscellaneous Sets the reader name and the saved image format.
 Symbol Verification Sets the parameters relative to the various specifications
in the Standards which regulate code validation.
90