Specifications

Matrix-2000™ Reference Manual
3
3.6 TYPICAL LAYOUTS
The following typical layouts refer to system
hardware configurations. However, they also
require the correct setup of the software configuration parameters. Dotted lines in the figures
refer to optional hardware configurations within the particular layout.
3.6.1 Point-to-Point
In this layout the data is transmitted to the Host on the Matrix-2000™ main serial interface.
The RS232 auxiliary interface can be used for reader configuration by connecting a laptop
computer running VisiSet™.
Parameter configuration can always be accomplished using the Matrix-2000™ auxiliary
interface.
When One Shot or Phase Mode operating mode is used, the reader can be activated by an
External Trigger (for example a pulse from a photoelectric sensor) when the object enters its
reading zone.
CAB-600X
Matrix-2000™
CBOX-100
Terminal
P.S.*
Main Interface
Local Host
PG 6000
* External Trigger or Presence Sensor (for One Shot or Phase Mode)
Figure 60 - Point-to-Point Layout
44