Specifications

Matrix-2000™ Reference Manual

Parameters to verify/modify:

 Operating Mode Sets the parameters which customize the reader operating

mode starting from three main modes:

One Shot: acquires a single image based on the selected

value for the Acquisition Trigger and Acquisition Trigger

Delay.

Continuous: continuously acquires images with a rate up to

60 frames per second depending on the decoding time.

Phase Mode: acquires images during the reading phase

depending on the selected value for the Acquisition Trigger

and Acquisition Trigger Delay. The Reading Phase-ON

and Reading Phase-OFF events mark respectively the

beginning and end of the reading phase.

 Calibration Calibrates the acquisition parameters to maximize the

reading performance (see par. 4.4.2)

 Communication Configures the parameters relative to each serial port

regarding the transmission, message formatting and string

receiving.

Any change to the VisiSet™ communication port

parameters (baud rate, data bits, etc.) is effective as soon

as the reader is disconnected from VisiSet™.

 Ethernet Sets the parameters related to the Ethernet interface and

to its communication channels.

 Image Processing Sets the image processing parameters shared by all

available symbologies.

 1D & 2D, Postal Codes

Sets the characteristics of the code symbologies to be

read.

 Data Collection Defines the code-collection parameters and the output

message format.

 Digital I/O Configures the reader input/output parameters.

 Match Code Allows setting a user-defined code and relative parameters

to which the read code will be compared (matched).

 Miscellaneous Sets the reader name and the saved image format.

 Symbol Verification Sets the parameters relative to the various specifications in

the Standards which regulate code validation.

 LEDs And Keypad Sets the LED and Keypad parameters related to their

selected Functions.