User`s manual

DL TCL™
18
3
3.8.1 General Parameters
Code Length
It defines the minimum and maximum length of the code to be read.
Figure 16 – Code Length
Reading Security
By setting these parameters it is possible to guarantee a more precise code reading.
Figure 17 – Reading Security
Severity : 0 defines a more aggressive decoding, while 2 a more severe decoding
Redundancy : defines the number of times (plus 1) the code will be read before being
accepted
Quiet Zone: defines a standard or a narrow quiet zone. Do not enable this parameter,
if code symbologies other than EAN/UPC, Code 39 and Codabar are
enabled
Output Format
It defines the message format and transmission mode.
Figure 18 – Output Format
Code ID Type : selects the type of code identifier or no code identifier.
Send no Decode Character: if checked, it sends the “NR” after the laser timeout or
when releasing the scanner trigger.
Strip A from Code 32 : if checked, it allows stripping preamble A from each read
Code 32.