User`s manual

CONFIGURING THROUGH DL MOBILE CONFIGURATOR™ ENTERPRISE 2
19
3
Preamble/Postamble
It defines the preamble and postamble characters using the ASCII decimal value.
Figure 19 – Preamble/Postamble
For all parameters possible values are in the range 0-128, where 128 corresponds to
disabled.
Reading Feedback
It defines the type of indicator signaling that the code has been decoded.
Figure 20 – Reading Feedback
Decode Beep Tone : defines the beep tone.
Good Reading LED : if checked, it enables the green LED on successful decoding.
Laser Control
It defines the management of the terminal laser.
Figure 21 – Laser Control
Laser Time Out : defines the laser timeout in steps of 0.5 seconds (for ex., 0 = 0.5 s;
7 =4 s).
Aiming Time : defines the aiming time in steps of 0.25 seconds (for ex., 7 = 1.75 s);
0 = disabled.