User`s manual

DL TCL™ EXTENDED COMMANDS

As described in the introduction of this chapter, press the numeric key corresponding

to the number next to each option to select the desired menu:

1) Network:

allows configuring the TCP/IP parameters of the terminal,

Host PC, Keep Connecting PC and radio;

2) Emulation:

allows configuring the specific parameters of the

VT100/VT220 and IBM5250/3270 emulation and the debug

procedure;

3) Device:

allows configuring the parameters managing the terminal

peripherals, such as scanner, keyboard, display and

beeper;

4) Info Terminal:

returns information about the terminal and the DL TCL™

software, such as Bios version, DL TCL™ emulation

version, MAC address of the radio card;

5) New Password:

allows setting a personalized password to enter the main

setup menu;

6) FTP-Server:

activates the terminal for loading the FTP protocol. Thus,

the terminal works as an FTP server;

7) Exit Setup:

allows exiting the main setup menu and jumping to the

opening mask;

8) Exit to DOS:

allows exiting the program and returning to the DOS

prompt.

4.2 NETWORK MENU

This menu allows configuring the terminal TCP/IP and radio parameters and setting

the terminal connection to either the first Host PC of the Multi-Host list (see par. 1.1)

or a KC PC (see the DL Keep Connecting™ User's Manual for details).

Datalogic - SETUP

Network Settings

1) TCP/IP

2) Radio

3) Connection

ENTER to Continue

Figure 33 - Network Menu