User`s manual

DL TCL™ EXTENDED COMMANDS

The IP Address value must respect the xxx.yyy.www.zzz structure, where x, y, w and

z value is in the range 0-255. After address selection and validation through the

[Enter] key, you will return to the first TCP/IP mask where the Static option is

displayed in reverse video. In case of wrong address definition, the terminal will not

proceed with the configuration.

Since the DHCP and BOOTP option have an exclusive selection, they do not open a

further mask.

 Subnet Mask

The terminal subnet mask is to be set when a fixed address has been defined. Its

value must respect the xxx.yyy.www.zzz structure, where x, y, w and z are in the

range 0-255.

Datalogic - SETUP

Network TCP/IP

- Subnet Mask:

ENTER to Continue

Figure 37 - Subnet Mask

 Gateway

The definition of the Gateway IP address must respect the xxx.yyy.www.zzz

structure, where x, y, w and z are in the range 0-255:

Datalogic - SETUP

Network TCP/IP

- Gateway Address:

ENTER to Continue

Figure 38 - Gateway Mask