User`s manual

DL TCL™
40
4
 Host
If configuring the Host PC, the communication will automatically enter the Direct Host
Mode (see par. 1.1.1 for details).
Datalogic - SETUP
- Host Name/IP Address:
- Host Port:
- Emulation:
Figure 46 - Host Selection
This mask requires to set the Host IP address or the Host name to be used by the
terminal when connecting to the Host PC and the TCP/IP port (default value is port
23). Then, you must select the desired emulation type (VT100, VT220,
IBM5250/3270) by means of the arrow keys.
 Keep Connect
An IP address for the 4 KC Host PCs listed in this mask can be defined to guarantee
a terminal connection.
[ENTER]
Datalogic - SETUP
Keep Connecting 1/2
1) KC1 Name / IP
2) KC2 Name / IP
3) KC3 Name / IP
ENTER to Continue
Datalogic - SETUP
Network Radio
4) KC4 Name / IP
5) Multi Session OF
F
ENTER to Continue
[ENTER]
Figure 47 - Keep Connect Menu
The Multi Session parameter selects the type of connection to be used by the
terminal to interact with applications running on a remote Host and provided by the
KC PC:
- SESSIONS -
a) Session 1
b) Session 2
c) Session 3
d) Session 4
ENTER: select ESC: Exit
KC1 MODE 1
Figure 48 - Applications Mask
This mask lists all sessions available on the KC PC. The desired session can be
selected by either using the arrow keys or pressing the key corresponding to the
letter next to each option. "Mode 1" appearing on top of this mask defines the session
number to be associated with the selected application. For this reason, up to 4
Modes can be defined. Each session usually corresponds to a specific application
which is emulated on the terminal.