User`s manual

DL TCL™ EXTENDED COMMANDS
43
4
 KeepAlive Timeout
It defines the time interval (in seconds) between the transmission of two NOP
packets.
 DL TCL Scroll
It enables/disables the DL TCL™ proprietary scroll mode. In particular,
the CTRL + Arrow sequence allows scrolling up, down, left and right; otherwise, it is
possible to activate other commands through the CTRL + key sequence (ex. for
DL 9600 Viper™ 48-key model: CTRL + C = break).
 Log Enable
It enables/disables the event log to track the events. All data received and sent from
the Host PC are saved to the DLLOG.TXT file positioned in "C:\". In addition, a
snapshot feature has been provided to capture the terminal screen to be logged.
During connection it is always possible to capture screens by pressing the [FUNC][P]
keys in sequence (for Viper™ 32-key models the key sequence is [FUNC][2]). Each
captured screen is saved to the DLLOG1.TXT file positioned in "C:\".
4.3.2 Emulation VT100/VT220
Datalogic - SETUP
Emulation
1) General
2) VT100/VT220
3) 3270/5250
ENTER to Continue
Datalogic - SETUP
Emulation VT 1/2
1) Local Echo OFF
2) Del to BS OFF
3) Enter CR + LF
ENTER to Continue
"2"
[ENTER]
“5”
Datalogic - SETUP
Login Termination
1) ENTER
2) TAB
ENTER to continue
[ENTER]
Datalogic - SETUP
4) Host Login
5) Login Termination
6) Command Execution
7) Relocation Row
ENTER to continue
[ENTER]
[ENTER]
Datalogic - SETUP
- Login Prompt:
- Login Answer:
ENTER to continue
"4"
[ENTER]
[ENTER]
Datalogic - SETUP
- Password Prompt:
- Password Answer:
ENTER to continue
[ENTER]
[ENTER]
Datalogic - SETUP
Rows Relocation
- Start Row:
- Number of Rows:
- Destin. Rows:
ENTER to continue
“6”
Datalogic - SETUP
- Command Prompt:
- Command Answer:
ENTER to continue
[ENTER] “7”
Figure 51 – VT100/VT220 Emulation Settings