User`s manual

DL TCL™ EXTENDED COMMANDS
45
4
4.3.3 Emulation 5250/3270
[
Datalogic - SETUP
Emulation
1) General
2) VT100/VT220
3) 3270/5250
ENTER to Continue
Datalogic - SETUP
5250/3270 1/2
1) Host Login
2) Command Executio
n
3) Relocation Rows
ENTER to Continue
"3"
[ENTER]
Datalogic - SETUP
AS400 Printer
- Row Position:
- Col Position:
- Flag Byte:
ENTER to continue
[ENTER]
Datalogic - SETUP
- User:
- Password:
ENTER to continue
Datalogic - SETUP
- Command Prompt:
- Command Answer:
ENTER to continue
[ENTER]
Datalogic - SETUP
Rows Relocation
- Start Row:
- Number of Rows:
- Destin. Rows:
ENTER to continue
“3”
Datalogic - SETUP
5250/3270 2/2
4) AS400 Printer
5) Reset Mode MANUAL
ENTER to Continue
[ENTER]
[ENTER]
“1”
[ENTER]
“2”
[ENTER]
“4”
Figure 52 – 5250/3270 Emulation Settings
 Host Login
It enables/disables the automatic login. The user must specify a value for both the
user and the password answer fields.
 Command Execution
It enables/disables the automatic execution of a command. In VT emulation, for the
command request the user must specify the prompt received from the host and insert
the value of the command answer in the corresponding fields.
 Relocation Row
It enables/disables the relocation of one or more rows. In this option the user can
relocate one or more lines from the physical screen of the host application to the
logical screen of the terminal. The parameters requested to activate this feature are:
- Start Row: line number of the physical screen from which the relocation starts;
- Number of Rows: the total number of rows to be relocated;
- Destination Row: line number of the terminal logical screen where the relocated
lines will be placed.