User`s manual

DL TCL™ EXTENDED COMMANDS
47
4
4.4.1 Input / Output
The Input submenu allows defining the data input through the keyboard or the
scanner.
[
Datalogic - SETUP
Device Settings
1) Input/Output
2) Display
3) Beeper
ENTER to Continue
Datalogic - SETUP
Input/Output Options
1) Keyboard
2) Scanner
3) Printer
ENTER to Continue
"1"
[ENTER]
Datalogic - SETUP
Scanner Options 2/2
4) Code Type
5) Clrbefore SCAN OFF
ENTER to continue
Datalogic - SETUP
Scanner Options 1/2
1) Scanner ON
2) Decode Beep
3) Term Key
ENTER to continue
Datalogic - SETUP
Printer Settings
1) RS232 Port
2) IRDA Port
ENTER to continue
Datalogic - SETUP
Term. Key 1/2
1) NONE
2) ENTER
3) TAB
ENTER to continue
“3”
Datalogic - SETUP
Keyboard Options
1) Uppercase OFF
ENTER to Continue
[ENTER]
“1”
“2”
[ENTER]
“3”
[ENTER]
[ENTER]
Datalogic - SETUP
Term. Key 2/2
4) FIELD EXIT
ENTER to continue
[ENTER]
[ENTER]
Figure 54 - Input / Output Options
 Keyboard
It enables/disables the conversion of all barcode data and keyboard digits to upper
case characters. If disabled, the barcode data keeps its original format and the
normal keyboard functioning is not changed.
 Scanner
It enables/disables the terminal laser reader and allows configuring other parameters
dealing with the terminal reading features. These parameters may be also configured
by means of the proprietary commands described in par. 5.1.
Available parameters are:
- Scanner enables/disables the terminal laser reader.
- Decode Beep: defines the beeper tone duration to be emitted upon
barcode decoding. Possible values are in the range 0-31.