User`s manual

DL TCL™
50
4
 Backlight
The terminal Backlight is managed through the following parameters:
- Auto: enables/disables the backlight each time a keyboard key is
pressed.
- Timeout: defines the timeout (secs.) for the backlight activation. As soon as
the timeout expires, the backlight is disabled.
These parameters are not effective when the backlight is disabled by BIOS.
 Cursor
It defines the shape of the cursor. Possible selections are Underline and Block.
 Scrolling Modes
The screen may be scrolled by choosing one of the following modes:
- Fixed: the terminal display is always locked at column 0 and row 0.
- Quadrant mode: The entire host screen (80x25) is divided in different
quadrants, where each of them defines the maximum number
of characters (columns X lines) available for the defined font
set. In AS400 emulation, if the active input field is completely
inside a quadrant, the display will be placed to this quadrant.
While the input fields that cross quadrant boundaries will
result in a shift to the left or right of the quadrant to include
completely the field. For the VT emulation, where the field
concept is not included in the standard, the display will be
placed in the same quadrant where the cursor resides.
- Center Cursor: the cursor will be maintained in the screen center.
- Locked: the display is locked at the position specified by the Lock Row
and Lock Column parameters.
4.4.3 Beeper
The Beeper submenu manages the beeper activation according to the terminal
functions.
Datalogic - SETUP
Device Settings
1) Input/Output
2) Display
3) Beeper
ENTER to Continue
Datalogic - SETUP
Beeper Options
1) Key Click OFF
2) Beep
ENTER to Continue
"1"
[ENTER]
"2"
[ENTER]
Datalogic - SETUP
Beeper Options
- Beep Duration:
- Beep Frequency:
Figure 56 - Beeper Options