User`s manual

TERMINAL ERROR MESSAGES
55
6
6 TERMINAL ERROR MESSAGES
During the terminal normal functioning some error messages may appear on the
display.
The following table lists and explains all error messages:
Error Message Description
Error on Password
A wrong password has been inserted.
Connecting KC1…
The terminal is trying to connect to KC HOST
1. A similar message is also displayed when
trying connection to other KC Hosts.
Error ConnectSocket (2)
A DOS error occurred
Error ConnectSocket (3)
No memory to perform function
Error ConnectSocket (4)
Connection does not exist
Error ConnectSocket (5)
Protocol or mode not supported
Error ConnectSocket (7)
No host address specified
Error ConnectSocket (13)
The function timed out
Error ConnectSocket (14)
Unknown host has been specified
Error ConnectSocket (18)
Bad arguments
Error ConnectSocket (19)
The connection has been closed by peer
Error ConnectSocket (20)
The connection has been reset by peer
Error ConnectSocket (21)
Operation would block
Error ConnectSocket (22)
The descriptor has not been assigned
Error ConnectSocket (23)
No socket is available
Error ConnectSocket (24)
Bad parameter in call
Error ConnectSocket (26)
The connection has not been established
NetSocket Error
Connection has been reset
NetSocket Error(5)
Peer has closed connection
NetSocket Error(6)
Connection has been closed
SOCKET CLOSED
The TCP/IP socket is closed. This error is sent
after the "Error ConnectSocket" or "NetSocket
Error" if no connection is active.
Reset and free memory.
An error has occurred during memory
allocation. It is advised to reset the terminal.
Are you sure to save New
Password? (Y/N)
The terminal prompts for confirmation before
saving a new password.