Quick Start Guide

Charge with the Dock

Insert the device into the dock with the screen facing front and the head facing up.

Use only the Datalogic power supply 94ACC0197 to power any of the docks.

For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to

the Quick Start Guide included in the dock's box.

The Memor 10 may get warm during charging. This is normal and does not mean a malfunction.

4. Replace the battery (see Battery Installation).

You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on

a computer.

Use only the Datalogic power supply 94ACC0196 to power the Memor 10.

Scanning and Imaging

Imager Data Capture

LINEAR BARCODE 2D MATRIX SYMBOL

Relative Size and Location of Aiming System Pattern