Installation manual

DS2400N REFERENCE MANUAL
14
1
ADVANCED SCANNER CONFIGURATION
The ADVANCED selection available when starting the Genius™ program is addressed to
expert users being able to complete a detailed scanner configuration. By choosing this option
it is possible either to start a new scanner configuration or to open and modify an old one.
The desired parameters can be defined in the following window, similar to the MS Explorer:
Figure 10 - Genius™ Parameter Explorer Window
Host Mode Programming
The scanner can also be configured from a host computer using the Host Mode
programming procedure, by commands via the serial interface. See the Host Mode
Programming file on the CD-ROM.
Alternative Layouts
 The ID-NET™ is a built-in high-speed interface dedicated for high-speed scanner
interconnection. ID-NET™ is in addition to the Main and Auxiliary serial interfaces.
If you need to install an ID-NET™ network refer to this DS2400N Reference Manual.
The scanner can also be configured for alternative layouts by reading programming
barcodes. See the "Setup Procedure Using Programming Barcodes" printable from the
CD-ROM.
 If you need to install an Ethernet network, Fieldbus network, Pass-Through network,
Multiplexer network or an RS232 Master/Slave network refer to the DS2400N Reference
Manual.