Installation manual

READING FEATURES
85
7
ACR-Lite is disabled by default but can be enabled for the following code types:
 Code 25 Interleaved  Code 128/GS1-128
 Code 39 Family  EAN/UPC (without ADD-Ons)
 Codabar  Code 93
 GS1 DataBar  GS1 DataBar Expanded
7.1.1 Important ACR-Lite Reading Conditions
 Do not use ACR-Lite for omni-directional reading stations.
 Code concatenation and ACR-Lite are not compatible and therefore cannot be enabled
simultaneously.
 Stacked codes and ACR-Lite are not compatible.
 Codes shorter than 4 digits, while readable linearly, cannot be reconstructed in ACR-Lite.
 Reconstruction reading mode is not compatible with scanner Raster models.
NOTE
To maximize scanner performance in Advanced Code Reconstruction
Reading applications:
 enable only the code symbologies that will actually be used in the
application and disable any code symbologies that will not be used in
the application
 reconstruct only one code label at a time
 use conveyor speeds less than or equal to 1.0 m/s
7.1.2 Tilt Angle for Advanced Code Reconstruction
The most important parameter in Advanced Code Reconstruction is the value of the
maximum tilt angle (maximum) under which the code reconstruction process is still
possible.

Laser Beam
= tilt angle

0° to

max
Figure 101 – Tilt Angle