Operation Manual

CONNECTIONS

802.11 a/b/g/n radio module is on by default, in order to avoid

wasting energy, you can switch it off using the Wireless

Communications applet.

NOTE

Suspending the terminal powers off the 802.11 a/b/g/n radio and

drops the radio connection. When the terminal resumes, depending

on the radio power mode and security protocol selected, it may take

up to 30 seconds for the 802.11 a/b/g/n radio driver to re-associate

the radio to the network.

NOTE

Area coverage and radio performance may vary, due to

environmental conditions, access point types or interference caused

by other devices (microwave ovens, radio transmitters, etc.).

NOTE

In case of heavy usage the Falcon X3+ may get warm; this is normal

and does not mean a malfunction.

NOTE