User Manual

Enter/Exit Programming Mode

Product Reference Guide

253

OTHER BT FEATURES

Bluetooth HID Variable PIN Code

Specifies the selection available for Static or Variable Pin Code, when Bluetooth

HID profile is configured.

Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)

require a Variable PIN Code. When attempting connection, the application pres-

ents a window that includes a PIN Code which is to be input using the Gryphon

GBT4

400. Scan the bar code "Variable PIN Code" below, then use the host com-

puter’s Bluetooth manager to “Discover new devices” and select "Datalogic

Sca

nner." Use a text editor to see incoming data on the port designated by the

computer's Bluetooth manager.

NOTE

If you receive an error message, it may be necessary to disable secu-

rity on the device.

When you hear the beep and see the Green LED blinking indicating the reader is

waiting for an alphanumeric entry, enter the required variable PIN Code by

scanning the corresponding bar codes in Appendix D, Keypad for alphanumeric

entry. Finish by scanning the Exit HID Variable PIN Code label.

$CBTHP00

Set Static Pin Code

DEFAULT

$CBTHP01

Set Variable Pin code

CANCEL

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start again

at the beginning.

Exit HID Variable PIN Code