Operation Manual

Setup Configuring the Base Station
24 Gryphon™ I GD44XX / GBT4400/GM440X
Figure 9. Arrows showing routing
Host Connection: Verify before connection that the reader’s cable type is compatible with your
host equipment.
Most connections plug directly into the host device as shown in
Figure 10 . Keyboard Wedge
interface cables have a ‘Y’ connection where its female end mates with the male end of the cable
from the keyboard and the remaining end
at the keyboard port on the terminal/PC.
Figure 10. Connecting to the Host
U
S
B
I
B
M
K
e
y
b
o
a
r
d
W
e
d
g
e
W
a
n
d
or...
or...
or...
Power Connection : Plug the AC Adapter in to an approved AC wall socket with the cable
facing downwards (as shown in
Figure 7 ) to prevent undue strain on the socket.
Disconnecting the Cable: To detach the cable, insert a paper clip or similar object into the hole
on the base, as shown in
Figure 11 .
Figure 11. Disconnecting the Cable
Insert
Paper Clip