Gryphon™ Mx00 Quick Reference
Gryphon™ Mx00 Readers QUICK REFERENCE
DATALOGIC S.p.A. Via Candini 2 40012 - Lippo di Calderara di Reno Bologna - Italy Gryphon™ Mx00 Readers Ed.: 10/2009 ALL RIGHTS RESERVED Datalogic reserves the right to make modifications and improvements without prior notification. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material.
CONTENTS Updates and Language Availability.....................................................................iv Using Gryphon™ M Series Readers................................................................... 1 Charging the Batteries ........................................................................................ 2 Gryphon™ M Configuration ................................................................................ 3 Using Multiple Readers with Same Cradle....................................
UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to : www.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo manuale è disponibile anche nella versione italiana. Collegarsi a : www.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Ce manuel est aussi disponible en version française.
GRYPHON™ MX00 USING GRYPHON™ M SERIES READERS The Gryphon™ M series reader, paired with an OM-Gryphon™ cradle, builds a Cordless Reading System for the collection, decoding and transmission of barcoded data. Gryphon™ M readers automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the center of the light bar emitted from the reading window. This bar must cover the entire code.
DATALOGIC CHARGING THE BATTERIES By placing the reader onto the OM-Gryphon™ cradle or C-Gryphon™ battery charger it is possible to charge the Gryphon™ M batteries. Make sure the charging LED goes on. The LEDs positioned on the cradle signal the charge status, as described in the following table: LED STATUS Yellow On = OM-Gryphon™ is powered. Power on / Yellow Blinking = OM-Gryphon™ receives data and Data commands from the Host or the reader. Red On = the battery charge is in progress.
GRYPHON™ MX00 When the above procedure is no longer effective, the batteries must be changed. To change the batteries of your reader, unscrew the battery cover screw, replace the old batteries with new ones, then insert the cover in the handle and screw it back into place. (See the following figures). + WARNING Do not incinerate, disassemble, short terminals or expose to high temperature. Risk of fire, explosion. Use specified charger only.
DATALOGIC Exit and Save configuration 4. 5. Ì$-?Î Read the Bind code to pair the Gryphon™ M to the OM-Gryphon™ cradle. The reader is dedicated to the cradle. Any previously bound reader will be excluded. To connect several readers to the same cradle see the following section "Using Multiple Readers with Same Cradle". Bind Ì$+RN0$-IÎ The green LED on the Gryphon™ M will blink: the reader is ready to be positioned onto the cradle. 6.
GRYPHON™ MX00 USING MULTIPLE CRADLE READERS WITH SAME If you want to use several readers associated with the same cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure). Successive readers can be associated with the same cradle by following the configuration procedure substituting the Bind command with Join. Join 5. Ì$+RN1$-NÎ The green LED on the Gryphon™ M will blink: the reader is ready to be positioned onto the cradle. Complete step 6.
DATALOGIC CODE SELECTION Enabled codes • Code PDF417 (only Gryphon™ M200) • EAN 8/EAN 13 / UPC A/UPC E without ADD ON check digit transmitted, no conversions • Interleaved 2/5 check digit control and transmission, variable length code; 4-99 characters • Standard Code 39 no check digit control, variable length code; 1-99 characters • Code 128 variable length code; 1-99 characters Disabled codes for M100 only: EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Plessey, Telepen, Delta IBM
GRYPHON™ MX00 TECHNICAL FEATURES Gryphon™ Mx00 Electrical Features Battery Type Time of recharge NiMh Operating autonomy (typ. continuous reading) Indicators Max scan rate Optical Features Sensor Illuminator Wavelength Max. LED Output Power Reading field Max. resolution PCS minimum Radio Features Working frequency Bit rate Effective Radiated Power Range (in open air) RF Modulation System Configuration Maximum number of devices per base stations Max.
DATALOGIC WARRANTY Datalogic warranties this product against defects in workmanship and materials, for a period of 24 months from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product, these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering.
GRYPHON™ MX00 RADIO COMPLIANCE Contact the competent authority responsible for the management of radio frequency devices of your country to verify the eventual necessity of a user license. Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further information. LED CLASS EN60825-1:(2001) Gryphon™ Mx00 USA Gryphon™ Mx00 EU Class 1 LED product.
DATALOGIC READING DIAGRAMS GRYPHON™ Mx00 (STANDARD) M100 (STD) - Reading Zones (10° skew angle) 15 0.13 mm (5 mils) 10 5 CODE 39 0.076 mm (3 mils) 0 CODE 39 0.13 mm (5 mils) EAN13 M=1 0.33 mm (13 mils) CODE 39 0.50 mm (20 mils) -5 -10 -15 0 5 10 15 20 25 30 35 (cm) GRYPHON™ Mx00 (PDF) M200 (PDF) - Reading Zones (10° skew angle) 10 0.13 mm (5 mils) 5 CODE39 CODE39 0.076 mm 0.13 mm (5 mils) (3 mils) 0 CODE39 0.50 mm (20 mils) EAN13 M=1 0.
GRYPHON™ MX00 NUMERIC TABLE Ì01Î 0 Ì12Î 1 Ì23Î 2 Ì34Î 3 Ì45Î 4 Ì56Î 5 Ì67Î 6 Ì78Î 7 Ì89Î 8 Ì9:Î 9 11
DATALOGIC S.p.A.
Australia Japan Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com France and Benelux Latin America Datalogic Scanning SAS Telephone: [33].01.64.86.71.00 france.scanning@datalogic.com Datalogic Scanning, Inc Telephone: (305) 591-3222 latinamerica.scanning@datalogic.com Germany Singapore Datalogic Scanning GmbH Telephone: 49 (0) 61 51/93 58-0 germany.scanning@datalogic.
