Heron™ D140 READERS QUICK REFERENCE GUIDE GUIDA RAPIDA GUIDE RAPIDE KURZANLEITUNG GUÍA RÁPIDA 820001212 (Rev.
USING HERON™ SERIES READERS UK Heron™ readers automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the light bar emitted from the reading window. This bar must cross the entire code. Successful scanning is obtained by tilting the scanner with respect to the barcode to avoid direct reflections, which impair the reading performance, see the figure above.
D Die Heron™ Lesepistolen lesen Strichcodes berührungslos. Es genügt auf den Code zu zielen und die Taste zu drücken. Der Code wird mittels eines Lichtbands gelesen, die das Gerät durch das Lesefenster verläßt und den gesamten Code durchqueren muss. Ein optimales Leseergebnis wird erreicht, wenn der Benutzer den Scanner bzgl. dem Code etwas neigt, um eine direkte Reflexion zu vermeiden, wie im Bild oben gezeigt wird.
CONNECTIONS DISCONNECTING THE CABLE
STAND INSTALLATION A B C UK The stand can be mounted by using self-tapping screws, double sided adhesive strips or rubber feet: A) B) C) mount the stand directly to the surface using the self-tapping screws; carefully clean the bottom surface of the stand and the table surface. Remove the protective plastic from one side of the adhesive strips and stick them on the stand bottom.
F Pour le montage du support il est possible également d’utiliser des vis filetées, des bandes adhésives ou des petits patins en caoutchouc: A) utiliser des vis filetées pour le montage sur la surface d’appui; B) nettoyer soigneusement la surface inférieure du support et la surface d’appui. Retirer le plastique protecteur de l’une des faces des bandes et la coller sur la surface inférieure du support.
INSERTION INTO STAND UK Pair the reader to the stand paying attention to insert the handle into the stand clip (see figure above). I Posizionare la pistola nello stand assicurandosi che il manico sia inserito nel fermo dello stand stesso (vedi figura sopra). F Placer le pistolet dans le support en faisant attention d’introduire la poignée dans le crochet du support (voir figure ci-dessus).
ELECTRICAL CONNECTIONS The Heron™ D140 scanner can be used with CAB 397 (coiled cable and 9-pin male connector) for direct connection to the DATAPLUS and DLD series decoders. CAB 397 1 2 6 3 7 4 8 5 9 1 - Not connected 2 - SCAN 3 - Not connected 4 - GND 5 - TRIGGER 6 - BEEPER/LED 7 - VIDEO 8 - ILLUMINATOR 9 - +VCC 9-pin male connector The Heron™ D140 scanner can be used with CAB 396 (coiled cable and 8-pin modular connector) for direct connection to PSC Inc. flat bed scanners.
BEEPER/LED This scanner input drives the decoding LED, the Good Read Spot and the beeper in the scanner. The LED and Good Read Spot turn on when a positive current is applied to the pin. The beeper sound is obtained pulsating this current at a frequency of about 2 kHz. The maximum voltage that can be applied to this input is 5 Vdc. VIDEO This “open collector” scanner output is electrically identical to the barcode.
BEEPER FUNCTIONING Heron™ Reader Start-Up Beeper 1 Meaning LLLL HHHH long tones HLHL OFF Parameters loaded correctly Parameter loading error, reading or writing in the non-volatile memory Hardware error in EEPROM No beeper performed when illuminator line is kept high at power on.
OPTIONAL CONFIGURATION PARAMETERS UK To configure the reader with the optional parameters, follow the procedure (5 steps). In step 3 select only the parameters relative to your application. I Seguire la procedura per configurare il lettore con i parametri opzionali (5 passi). All’interno del passo 3 selezionare solamente i parametri relativi alla propria applicazione. F Suivez dans l’ordre les étapes décrites pour configurer le pistolet avec les paramètres optionnels (5 points).
Video Polarity Normal: space white bar black barcode output Video Polarity Inverted: bar black space white barcode output SCAN RATE 18 scan/sec ÌDI0`Î 72 scan/sec ÌDI2fÎ 36 scan/sec ÌDI1cÎ 144 scan/sec ÌDI3iÎ BEEPER INTENSITY Beeper Off ÌBG0ZÎ Medium Intensity ÌBG2`Î Low Intensity ÌBG1]Î High Intensity ÌBG3cÎ
BEEPER TONE Tone 1 ÌBH0\Î Tone 2 ÌBH1_Î Tone 3 ÌBH2bÎ Tone 4 ÌBH3eÎ BEEPER LENGTH Long ÌBI0^Î Short ÌBI1aÎ BEEPER TYPE Monotone ÌBJ0`Î Bitonal ÌBJ1cÎ 4. Exit Configuration Ì$-?Î 5.
TECHNICAL FEATURES Heron™ D140 Electrical Features Power supply 5 Vdc ± 5% Consumption Operating Stand by 180 mA @ 5 Vdc 50 mA @ 5 Vdc CCD Scan Rate 256 scans/sec Max output scan rate 144 scans/sec Reading Indicators LED, Good Read Spot, Beeper Optical Features Sensor Illuminator Wavelength Max. LED Output Power CCD solid state (2048 pixels) LED array 630 ~ 670 nm 0.31 mW LED Safety Class Class 1 EN 60825-1 Reading Field see reading diagram Max. Resolution PCS 0.12 mm (5 mils) min.
READING DIAGRAM D140 - Reading Zones (10° skew angle) 15 EAN13 M=1 0.33 mm (13 mils) 10 CODE 39 0.50 mm (20 mils) 0.50 mm (20 mils) 5 CODE 39 0.13 mm (5 mils) 0 -5 -10 -15 0 5 10 15 20 25 30 35 (cm) COMPLIANCE FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules.
LED CLASS UK Class 1 LED product I Apparecchio LED classe 1 F Appareil à LED de classe 1 D LED Klasse 1 E Clase de LED 1 This product conforms to EN60825-1:2001. PATENTS This product is licensed under the following U.S. patent: 6,158,661 This product is covered by one or more of the following patents: U.S.
WARRANTY UK Datalogic warranties this product against defects in workmanship and materials, for a period of 5 years from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering.
SERVICES AND SUPPORT • UK Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the Ulinks indicated for further information including: I Datalogic fornisce servizi e supporto tecnico tramite il suo sito web. Connettersi al sito www.scanning.datalogic.com e cliccare sui link indicati per avere ulteriori informazioni, come elencato di seguito: F Datalogic fournit différents services et une aide technique en ligne.
Datalogic Scanning, Inc.
