Operation Manual

Standard JavaPOS Scale operations
22 Datalogic™ JavaPOS Device Services
Standard JavaPOS Scale operations
See the Unified POS Retail Peripheral Architecture v1.13 for Properties and
Methods.
Power Reporting Property
Scale CapPowerReporting is JavaPOS_PR_NONE:0. Power reporting is not
supported by Datalogic scanner/scales.
The Power
Notify property is not used, and changes to it are ignored by
Datalogic JavaPOS Device Services. StatusUpdate events are not fired by
the Datalogic JavaPOS Device Services.
Check Health Method
The scale supports health check, included as part of scanner response.
There is no separate health check for scanner or scale. The command is
supported on a scale as long as it is claimed, but always reports back a
ResultCode of “JavaPOS_SUCCESS”.
Display
Scale supports a remote display, but does not support text display. The POS
application cannot send data to the scale’s remote display (CapDisplay-
Text = FALSE).
Live Weight Display
The live weight display can be enabled by selecting the following check
boxes in this specific order:
1. Check “Status Notify enabled.”
2. Check “Data Event enabled.”
3. Check “Device enabled.”