User`s manual

1 MEMOR™ X3

4.6.3 FTP Server Setup

The Memor X3 Windows CE Operating System includes a sample File Transfer

Protocol (FTP) server. FTP is used for copying files to and from remote computer

systems over a network using TCP/IP. You can establish a connection to your

Memor X3 using its FTP Server through the WLAN interface.

Proceed as follows:

1. Create a registry file (extension .reg) to setup and enable FTP Server

communication. A simple example file for anonymous logon is given below:

REGEDIT4

[HKEY_LOCAL_MACHINE\Comm\FTPD]

"DefaultDir"="\\"

"AllowAnonymousUpload"=dword:00000001

"UseAuthentication"=dword:00000000

"BaseDir"="\\"

"IsEnabled"=dword:00000001

"LogSize"=dword:00001000

"DebugOutputMask"=dword:00000017

"DebugOutputChannels"=dword:00000002

"IdleTimeout"=dword:0000012c

"AllowAnonymous"=dword:00000001

"AllowAnonymousVroots"=dword:00000001

2. Copy this file to the Memor X3 using ActiveSync

3. Launch the .reg file from the Memor X3.

4. Perform a warm boot on the Memor X3.

5. From the PC > Explorer address bar (or running an FTP Client from the PC),

enter the Memor X3 IP address.

For more information on FTP Client/Server connections

refer to the following web page:

http://msdn2.microsoft.com/en-

us/library/aa922316.aspx.

NOTE