User`s manual

USE AND FUNCTIONING

4.9 DATALOGIC CONFIGURATION UTILITY

Datalogic Configuration Utility (DCU) is a Datalogic Windows-based utility tool

allowing the uploading, modifying and downloading of the configuration of a Datalogic

device. Configuration settings include Scanner, Control Panel, and Datalogic

Desktop Utility (DDU). The DCU installer is downloadable from the Datalogic website

(http://www.datalogic.com/eng/support-services/automatic-data-

capture/downloads/software-utilities-sw-2.html).

DCU functions in both direct (with an ActiveSync connection) and indirect (with

Wavelink Avalanche™) modes.

In direct mode, connect a device through ActiveSync and then click on the Get from

Device icon to receive the device’s current configuration.

Once loaded, the Configuration Tree (on the left side of the window) is used to

navigate the device’s configuration. The right side of the window is a work area

where the values of different parameters may be set for each branch of the

configuration tree. Click on the parameter group branch to open it and inspect the

parameters you wish to modify.

After altering the device’s configuration, the new configuration can be sent to the

terminal by clicking on the Send to Device icon.

Reference the Wavelink Avalanche™ documentation on the Wavelink website

(www.wavelink.com/Datalogic-device-downloads) for a description of indirect mode

for DCU, which will allow you to update the configuration of multiple devices

simultaneously over Wi-Fi.