User's Manual

USE AND FUNCTIONING
69
3
NOTE
Server and connecting to an FTP Client. See par.3.14.5.
3.14.4 Bluetooth® Manager Device Setup
In order to enable a Bluetooth device for communication with the Datalogic
Joya™ you must perform the discovery procedure and enable the device as
follows:
1. Place the Bluetooth device within the range of the Datalogic Joya™ (10
meters).
2. From the “Control Panel” main window double tap on the “Bluetooth”
applet to open the Bluetooth
®
Manager Device window:
3. Tap on the “Me” button to enter the related window; then, tap on the “ON”
button to activate the Bluetooth module. The module activation may be
also performed by using the WIRELESS COMMUNICATION applet as
described in par. Errore. L'origine riferimento non è stata trovata..
By tapping on the “HW Details” and “SW Details” buttons, information
about the mobile computer Bluetooth hardware and software will be
displayed, while the “Enable Encryption” button starts encryption of the