User's Manual

DATALOGIC JOYA™ X2

1 3

To capture data first of all select the Decoding icon on the Control Panel and

open the applet.

To configure and enable data capture parameters refer to par. 3.11.

3.8.1 Imager Data Capture

The device captures a picture of the entire bar code. The omnidirectional

scanning does not require that the operator orient the bar code to align with the

scan pattern. To read a 1D or 2D code, simply point the JOYA™ X2 onto the

code and press the “Up” key. The JOYA™ X2 uses an intelligent aiming

system pattern, indicating the field of view, which should be positioned over the

code: