User's Manual

DATALOGIC JOYA™ X2
24
2
In order to avoid wasting energy, the Bluetooth® module is
off by default. If you need to have Bluetooth® working, the
module must be powered on using the Wireless
Communications applet and perform the Discovery
procedure.
NOTE
Suspending the terminal powers off the Bluetooth  radio and
drops the piconet (Bluetooth  connection). When the
terminal resumes, it takes approximately 10 seconds for the
Bluetooth  radio driver to re-initialize the radio.
NOTE
Area coverage and Bluetooth  radio performance may vary,
due to environmental conditions or interference caused by
other devices (microwave ovens, radio transmitters, etc.), etc.
NOTE
3 USE AND FUNCTIONING
The use of the Datalogic JOYA™ X2 depends on the application software
loaded. However there are several parameters that can be set and utilities that
can be used to perform some basic functions such as data capture,
communications, file management, etc.
Furthermore there are two major utilities embedded in the software provided
from factory:
• ScanToConfig
• Avalanche Enabler
3.1 STARTUP
The Datalogic JOYA™ X2 turns on when a charged battery pack is inserted.
As soon as the mobile computer is on, the “ScanToConfig” request screen
appears and stays on for five seconds: