Operation Manual

Product Reference Guide F-1
Appendix F
Factory Defaults
The following table provides a listing of the most common factory settings
for the interfaces shown.
Table F-1. Factory Default Settings
RS-232
Wincor-
Nixdorf
RS-232
Single
Cable
Keybd.
Wedge
IBM OEM USB
Scanner Button Options
Enable Std
Functions
Enable Std
Functions
Enable Std
Functions
Enable Std
Functions
Enable Std
Functions
Enable Std
Functions
Double Read Timeout 400ms 400ms 400ms 400ms 400ms 400ms
Laser Timeout 5 min. 5 min. 5 min. 5 min. 5 min. 5 min.
Motor Timeout 10 min. 10 min. 10 min. 10 min. 10 min. 10 min.
Label Gone Timeout 160 msec 160 msec 160 msec 160 msec 160 msec 160 msec
Auxiliary Port Mode Disable
Enable
Handheld
Disable Disable Disable Disable
Auxiliary Port Baud Rate 19200 19200 19200 19200 19200 19200
Laser Failure Mode Single OK Single OK Single OK Single OK Single OK Single OK
Productivity Index Report-
ing (PIR)/Cashier Training
(CT)
Disable Disable Disable Disable Disable Disable
Green LED Idle State On dim On dim On dim On dim On dim On dim
Power-up Beep Control 1 beep 1 beep 1 beep 1 beep 1 beep 1 beep
Good Read Beep Control Enable Enable Enable Enable Enable Enable
Good Read Beep Fre-
quency
Medium Medium Medium Medium Medium Medium
Good Read Beep Length 80ms 80ms 80ms 80ms 80ms 80ms