MagellanTM 8300/8400 Quick Reference Guide
Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 ©2006-2013 Datalogic ADC, Inc. An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”).
DATALOGIC ADC, INC. MAGELLANTM END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement.
6.2 the provisions of this Agreement. EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 7. Infringement. 7.1 7.2 7.3 7.
Quick Reference The object of this manual is to provide general operational information for the user. For more product details, including installation, set-up, programming and advanced user information, reference the Product Reference Guide (PRG), which is available for viewing and download from the website listed on the back cover of this manual. Controls and Indicators The control panel consists of an indicator LED and two push buttons as shown in Figure 1.
Power Supply Características de la fuente de alimentación eléctrica. The scanner may require either a Listed Class 2 or Listed LPS power source which supplies power directly to the unit. It is sometimes possible for a scanner to receive power directly from the terminal (P.O.T.). See the current product data sheet for more information about P.O.T. Atención Entrada: 100 - 240 Vca 600mA 50/60 Hz Salida: +12 VDC 1500mA. (-) Negativo al centro Utilice en su red solo fuentes certificadas en Argentina.
With the 360° scan pattern and advanced FirstStrike® decoding software, the Magellan® 8300/8400 can read most hard-to-read codes quickly and without excess orientation. Weighing Items Using the All-Weighs® Platter Items to be weighed can be placed anywhere on the L-shaped All-Weighs® platter (weigh platter) surface. Oversized items can even be accurately weighed while leaned against the center of its vertical section as shown.
Table 1.
Volume/Tone Push Button The Volume/Tone Push Button also performs multiple functions depending upon the duration of time it is pressed: Table 2. Volume/Tone Push Button Functions PRESS DURATION FUNCTION COMMENT Wakes scanner from Sleep Mode Alternatively, the scanner can be awakened by: - Moving an object through the scan zone. - A weight change on the scale. - Scanning with an attached auxiliary scanner. Increments volume Press the push button momentarily to increase speaker volume.
Scale Zero Push Button The Scale Zero Push Button is used for two functions as described in Table 3. This button has no function on “scanner-only” models. Table 3. Scale Zero Push Button Functions PRESS DURATION FUNCTION COMMENT Zero Scale When programmed to do so, the yellow Scale LED should be lit when no weight is on the scale, indicating scale at zero. If it is not, press the switch to zero the scale. The unit will sound a “click” upon pressing the button.
Product Labeling The location of scanner and scanner/scale labeling is shown in Figure 4. Figure 4. Labeling Product Family Label Labels are IEC Laser Warning Model/Serial Number located under the platter, inside the unit and on its Bottom Cover. Scale Regulatory I/F Connector ID and Regulatory Labels are shown here to illustrate their general location only. Please view the labels on your product for actual details. NOTE Compliance Statement This device complies with Part 15 rules.
Adaptive Scale Platter Option Some Platters have been shipped with installed spacers on their undersides at all four corners. These specially-configured Platters are provided for customers wishing to add an adaptive scale to their unit at a later date. Until such time as the adaptive scale is installed, the four spacers should be left in place to ensure that the Platter rests evenly at its correct height when positioned on the scanner.
Appendix A. Regulatory Statements WEEE Statement Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.datalogic.com.
10 直角支架 安装支架 8300/8400通用组件 光学支架组件 接口电路板组件 显示器组件 终端断电组件 Flange Mount Shelf Mount Common Kit, 8300/8400 Assembly, Optics Mount PCB Assembly, Interface Assembly, Remote Display Power Off Terminal Assembly X X X X X X X X X 铅 O O O O O O O O O 汞 Mercury (Hg) Hexavalent Chromium (Cr(VI)) Polybrominated biphenyls (PBB) O O O O O O O O O 镉 O O O O O O O O O 六价铬 O O O O O O O O O 多溴联苯 有毒有害物质或元素 Cadmium (Cd) O O O O O O O O O 多溴二苯醚 Polybrominat
Quick Reference Guide 半导体激光组件 直角支架 安装支架 电子称组件 电子秤支架组件 8300/8400通用组件 光学支架组件 接口电路板组件 显示器组件 终端断电组件 Flange Mount Shelf Mount Scale Assembly Assembly, Spider Common Kit, 8300/8400 Assembly, Optics Mount PCB Assembly, Interface Assembly, Remote Dis play Power Off Terminal Assembly X X X X X X X X X X X 铅 O O O O O O O O O O O 汞 Mercury (Hg) Hexavalent Chromium (Cr(VI)) Polybrominated biphenyls (PBB) O O O O O O O O O O O 镉 O O O O O O O O O O O 六价铬 O O
NOTES 12 MagellanTM 8300/8400
Appendix B.— Warranty Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 1 year from product shipment. Datalogic ADC Limited Factory Warranty Warranty Coverage Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use.
Warranty Exclusions The Datalogic Factory Warranty shall not apply to: (i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives; (ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic; (iii) any claimed defect or damage cau
EC-088 Rev.: 1 EC DECLARATION OF CONFORMITY Non-Automatic Weighing Instrument This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC, Inc.
www.datalogic.com © 2006-2013 Datalogic ADC, Inc. • All rights reserved. • Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Datalogic ADC, Inc. 959 Terry Street | Eugene |OR 97402 | USA Telephone: (1) 541-683-5700 | Fax: (1) 541-345-7140 820032614 (Rev.
