MagellanTM 8500Xt Scanner and Scanner-Scale with SurroundScan® 3D Scanning Technology Quick Reference Guide
Datalogic ADC, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”).
DATALOGIC ADC, INC. MAGELLANTM END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement.
6.2 requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports according to Datalogic's standard assistance practices.
Introduction This Quick Reference Guide presents a brief description of scanner and scanner/scale operation for your convenience. If you’d like more detailed information about setup, installation and programming, see the Product Reference Guide for this product. These manuals are provided in Portable Document Format (PDF) for viewing and printing from the website listed on the back cover of this manual. Additionally, printed manuals can be ordered from your dealer/distributor.
With the SurroundScan™ scan pattern and advanced FirstStrike™ decoding software, the Magellan® 8500Xt can read most hardto-read codes quickly and without excess orientation. Produce RailTM Weighing Items The L-shaped All-Weighs™ platter allows you to place items anywhere on its surface, including leaning against its vertical section, to be weighed accurately. The raised Produce RailTM also provides a convenient way to ensure that items do not rest on the counter or other non-weighing surfaces.
LED INDICATION DURATION Program Mode Indication Green LED - Continuous flashing Sleep Mode Indication Green LED flashes slowly. Host Disabled Field Replaceable Unit (FRU) Warning (Error Mode) FRU Indication COMMENT Indicates the scanner is in Label Programming Mode. Cycle power to exit Programming Mode. The scanner motor and/or laser have automatically switched off and the unit has entered Sleep Mode due to extended inactivity. Scanner (Green) LED 1-second Host has disabled scanning.
Table 2. EAS Indications INDICATION LED DURATION EAS BEEPER COMMENT EAS DEACTIVATION DISABLED Deactivation Disabled Deactivation (Tri-color) LED is off Deactivation mode must be selected via programming. Reference the PRG. OFF ALL MODES (COUPLED, DECOUPLED, HYBRID or HOST) Deactivation Ready Deactivation (Tri-color) LED is lit steadily Green. OFF Deactivation is ready. EAS Label Detected Deactivation (Tri-color) LED flashes Red. OFF An EAS label has been sensed in the scan volume.
INDICATION LED DURATION Manual Deactivation Successful Deactivate EAS System When Failed Deactivation (Tri-color) LED flashes Red, then Orange, then returns to Green. Deactivation (Tri-color) LED is flashing slowly Red.
Volume/Tone Push Button The Volume/Tone Push Button also performs multiple functions depending upon the duration of time it is pressed: Table 4. Volume/Tone Push Button Functions PRESS DURATION FUNCTION COMMENT Wakes scanner from Sleep Mode Alternatively, the scanner can be awakened by: - Moving an object through the scan zone. - A weight change on the scale. - Scanning with an attached auxiliary scanner. Increments volume Press the push button momentarily to increase speaker volume.
Manual EAS Deactivation Push Button1 Using the programming bar codes contained in the Product Reference Guide (PRG) the button can be configured to operate always, or only function when the scanner is enabled. PRESS DURATION Momentarya 3 Seconds upon EAS error FUNCTION COMMENT Manually initiates EAS deactivation Center the item with the EAS tag in the scanning area and push the button.
EAS Mode Programming Instructions The barcodes below control the mode of operation for interfacing with the Sensormatic® AMB-9010EAS controller (EAS-equipped units only). To select one of the two modes, simply scan the desired bar code from this page while obscuring the other (unused) bar code by either folding the page or covering it with a blank piece of paper. You will not need to scan a "Switch" bar code or perform other steps to configure the scanner's EAS mode.
Appendix A — Product Labeling IEC CLASS 1 LASER PRODUCT U.S., CANADA, MEXICO AND JAPAN Or... Nmax = 3000 Max 6/15 kg Min 0.04 kg Interval 1: e=2g Interval 2: e=5g n =3000 NTEP cc: 07-034 AM-5454 Max =12/30lb d =0.005/0.01lb Max =6/15kg d =2/5g T7276 TC7516 +10° C/+40° C 90/384/EEC MAGELLAN 8500Xt Datalogic Scanning, Inc. 959 Terry St. Eugene, OR 97402 USA PRODUCT OF USA “+10° C/+40° C MODEL: XXXX CLASS NO: XXXXXX-XXXXX-XXXXX-XX SERIAL NO: XXXXXXXX MFG DATE: Month Day Year GRAVITY (M/SEC2): 9.
NOTES 10 MagellanTM 8500Xt
Appendix B — Laser Safety International Caution Statements Class I English This scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC60825-1. Class I and Class IIa products are not considered to be hazardous. The scanner contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
ATTENZIONE • • • Danish l’uso di comandi o di procedure diversi da quelli specificati in questa sede possono causare l’esposizione ad una luce laser pericolosa. evitare di tentare di aprire o riparare dei componenti nella cavità ottica. L’apertura o la riparazione della cavità ottica da parte di persone non autorizzate può essere in violazione dei regolamenti di sicurezza relativi all’impiego di raggi laser. Il sistema ottico può essere riparato soltanto in fabbrica.
Finnish Tämä tutkain on hyväksytty Yhdysvalloissa vastaamaan DHHS/CDRH 21CFR Subchapter J luokka II ja 60825-1 IEC-vaatimuksia. Luokka I tai Luokka II tuotteiden ei katsota olevan vaarallisia. Tutkain sisältää sisäisen näkyvän laserdiodin (Visible Laser Diode (VLD), jonka päästöt eivät ylitä yllä olevien säädösten asettamia maksimirajoja.
Chinese Japanese 14 MagellanTM 8500Xt
Hebrew Quick Reference Guide 15
NOTES 16 MagellanTM 8500Xt
Appendix C Warranty Datalogic warrants to Customer that this product will be free from defects in materials and workmanship for a period of 1 year from product shipment. Datalogic ADC Limited Factory Warranty Warranty Coverage Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use.
(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic; (iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus; (iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in acco
EC DECLARATION OF CONFORMITY Non-Automatic Weighing Instrument Datalogic hereby declares that the apparatus specified below and as referenced in the EC Type Approval Certificate has been tested and found compliant to the following European Council Directives and harmonized Standards. Equipment Type: Barcode Scanning and Weighing Equipment Class: Apparatus: Magellan 8500 and 9500 Families EC Type Approval Certificate: UK2660 Year in which "CE"marking first affixed: 09 Manufactured by: Datalogic ADC, Inc.
www.adc.datalogic.com Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 ©2004-2012 Datalogic ADC, Inc. 820032714 (Rev.
