Operation Manual

Enter/Exit Programming Mode

384

Magellan™ 9800i Scanner

Micro QR Code Length 1, Length 2 Programming Instructions

If Micro QR Code Length Control is set to Fixed-Length decoding, this feature specifies Micro

QR Code first fixed length. If Micro QR Code Length Control is set to Variable-Length

decoding, this feature specifies the minimum label length.

NOTE

Length 1 is the minimum label length if in variable length mode, or

the first fixed length if in fixed length mode. Length 2 is the maxi-

mum label length if in variable length mode, or the second fixed

length if in fixed len

gth mode. Length includes the barcode's data

characters only. Any value > 3700 will be considered to be 3700.

To set this feature:

1. Scan the ENTER/EXIT Programming Mode bar code.

2. Scan the barcode,

Set Aztec Length 1 or Set Micro QR Code Length 2 below. You’ll need

to cover any unused barcodes on this and the facing page to ensure that the scanner reads

only the bar code y

ou intend to scan.

3. Scan the appropriate digits from the

Keypad in Appendix C that represent the desired

label length. The selectable range for this option is 0001 to 3700

. Pad all numbers with

leading zeros to yield a four-digit entry (0001-3700).

4. Complete the programming sequence by scanning the ENTER/EXIT Programming

de bar code.

Default setting for this feature = 0001

042B(CR)

Set Micro QR Code Length 1

042C(CR)

Set Micro QR Code Length 2

Default setting for this feature = 3700