Datalogic Memor™ www.mobile.datalogic.com World wide Sales Network available from: www.mobile.datalogic.com/contacts Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147561 User’s Manual 822000890 ©2009 Datalogic Mobile S.r.l.
Datalogic Mobile S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Datalogic Memor™ - User's Manual Software Version: 4.00 Ed.: 09/2009 ALL RIGHTS RESERVED The Datalogic name and logo are registered trademarks of Datalogic S.p.A. in many countries. The Memor name is a trademark of Datalogic Mobile S.r.l. All other brand and product names mentioned herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners.
CONTENTS REFERENCES.....................................................................................v Conventions .........................................................................................v Reference Documentation ...................................................................v Services and Support...........................................................................v SAFETY REGULATIONS ...................................................................vi General Safety Rules ...
3.5 3.5.1 3.5.2 3.6 3.6.1 3.6.2 3.7 3.7.1 3.7.2 3.7.3 3.7.4 3.7.5 3.7.6 3.8 3.8.1 3.8.2 3.8.3 3.8.4 3.9 3.10 Status Indicators ............................................................................... 37 LED Status ........................................................................................ 37 Taskbar ............................................................................................. 38 Data Capture Configuration...............................................................
REFERENCES CONVENTIONS This manual uses the following conventions: “User” refers to anyone using a Datalogic Memor™ mobile computer. “Mobile computer” and "Datalogic Memor™" refer to Datalogic Memor™ mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Datalogic Memor™ mobile computer. “Single Cradle” refers to the Datalogic Memor™ Single Cradle.
SAFETY REGULATIONS NOTE Read this manual carefully before performing any type of connection to the Datalogic Memor™ mobile computer. The user is responsible for any damages caused by incorrect use of the equipment or by inobservance of the indication supplied in this manual. GENERAL SAFETY RULES − Use only the components supplied by the manufacturer for the specific Datalogic Memor™ being used.
LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure. This information applies to both laser models and the Datalogic Memor™ Imager Aiming System.
I D F La luce laser è visibile all'occhio umano e viene emessa dalla finestra indicata nella figura. Die Laserstrahlung ist für das menschliche Auge sichtbar und wird am Strahlaustrittsfenster ausgesendet (siehe Bild). Le rayon laser est visible à l'oeil nu et il est émis par la fenêtre désignée sur l'illustration dans la figure. La luz láser es visible al ojo humano y es emitida por la ventana indicada en la figura.
ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your mobile computer. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 Subchapter J and EN 60825-1:2001 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. CAUTION Do not attempt to open or otherwise service any components in the optics cavity.
Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. ATTENZIONE L’apertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico può essere riparato solamente alla fabbrica. L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce laser visibile.
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, können ein gefährliches Laserlicht verursachen. ACHTUNG Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
ATTENTION L’utilisation d’instruments optiques avec le scanneur augmente le danger pour les yeux. Les instruments optiques comprennent les jumelles, les microscopes, les lunettes et les verres grossissants. ESPAÑOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal.
LED CLASS According to EN60825-1:2001, the Datalogic Memor™ 1D models which use the green spot LED are also CLASS 1 LED PRODUCTS. APPARECCHIO LED CLASSE 1 IEC PRODUKT LED KLASSE 1 IEC PRODUIT LED DE CLASSE 1 IEC PRODUCTO LED DE CLASE 1 IEC According to EN60825-1:2001, the Datalogic Memor™ 2D models which use the illuminator LED are also CLASS 1M LED PRODUCTS.
Information for the User ENGLISH Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required. Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further information. ITALIANO Prendi contatto con l'autorità competente per la gestione degli apparati a radio frequenza del tuo paese, per verificare eventuali restrizioni o licenze.
FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAR COMPLIANCE - This product has been tested and found to comply with the following standards: OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC guidelines for human exposure to radio frequency electromagnetic fields. - EN 50360:2001: product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz – 3 GHz).
WEEE COMPLIANCE Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
éviter les retombées négatives pour l'environnement et la santé dérivant d'une élimination incorrecte récupérer les matériaux dans le but d'une économie importante en termes d'énergie et de ressources Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le fournisseur auprès duquel vous avez acheté le produit ou consulter la section consacrée au site Web www.mobile.datalogic.com.
CHINA ROHS POLLUTION CONTROL LOGOS Part name Upper Case Lower Case Touch Panel PCB Board Laser Engine Imager Engine GSM Module (Note 1) BT Module (Note 2) 802.
GENERAL VIEW B D K C I J H A L E M F G A) B) C) D) E) F) QVGA 64K Color Display Good Read or User Programmable LED Charging Status LED Speaker Scan Key Keyboard G) Microphone H) Strap with Stylus Holder I) Laser Safety Label J) Rear Speaker K) ON/OFF Power Key L) Product Label (under battery) M) Battery Cover O P Q N N) O) Data Capture/Laser Output Window * DC Charger Connector ∗ Remove protective film cover before use xx P) Communication/Charger Connector (through cradle) Q) Mini USB Comm
INTRODUCTION 1 1.1 1 INTRODUCTION DATALOGIC MEMOR™ DESCRIPTION The newly updated Datalogic Memor™ mobile computer maximizes a compact and light weight form factor for ease of use and shirt pocket convenience without compromising durability. Feature introductions include the Microsoft Windows Mobile 6.1 operating system, an imaging bar code scanner, and a GSM radio with Edge. All three of these options combine to make the Memor a viable alternative for use in Field Force Automation applications.
DATALOGIC MEMOR™ 1 are essential. Datalogic’s patented Green Spot good read feedback makes Memor’s laser scanner intuitive while reducing errors. The 2D scan engine option leverages picture technology to capture a wide range of Linear, Stacked, and 2D codes while also providing the flexibility to capture a signatures or drivers license. Digital image decoding software reduces failed reads due to damaged and poor quality barcodes while enabling the user to scan from almost any orientation.
INTRODUCTION 1 • 944201015 DL-Memor+802.11g+BT+2D+WM6.1 Datalogic Memor, 802.11b/g CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key Numeric, Std 2D Imager, WM 6.1 • 944201018 DL-Memor+EdgeE+BT+2D+WM6.1 Datalogic Memor, Edge Europe, Bluetooth, 128MB RAM/256MB Flash, 23-key Numeric, Std 2D Imager, WM 6.
DATALOGIC MEMOR™ 1 1.3 PACKAGE CONTENTS The Datalogic Memor™ package contains: − 1 Datalogic Memor™ mobile computer − 1 AC/DC power supply − 1 EU plug adapter − 1 AUS.
INTRODUCTION 1.4 1 INSERTING A MICRO SD CARD Datalogic Memor™ provides the possibility to add a Micro SD memory storage card. To access the Micro SD card slot and insert the card, proceed as follows: 1. Turn off the Datalogic Memor™. 2. Press the latch release button and pull the latch down, as indicated in the figure below: a.
DATALOGIC MEMOR™ 1 6. b. Shift the cardholder to the left and then pull it up; insert the Micro SD card with the written part upward. c. Lock the card into place by pushing the cardholder down and then shifting it to the right; pull the locking plate down. Close the battery cover properly, by pressing the latch release button and pulling the latch down. To remove the Micro SD card, follow the steps above to access the SD area, and remove it from its slot.
INTRODUCTION 1.5 1 INSTALLING THE SIM CARD To correctly insert the SIM Card, proceed as follows: 1. Turn off the Datalogic Memor™. 2. Press the latch release button and pull the latch down, as indicated in the figure below: 3.
DATALOGIC MEMOR™ 1 4. Shift the cardholder to the left and then pull it up; insert the SIM Card with its contacts downward and its round corner at the bottom: 5. Lock the card into place by pushing the cardholder down and then shifting it to the right. 6. Pull the locking plate down. 7. Close the battery cover properly, by pressing the latch release button and pulling the latch down. Follow proper ESD precautions to avoid damaging the SIM card.
INTRODUCTION 1.5.1 1 Removing the SIM Card To remove the SIM card, follow the steps above to access the SIM area, and remove it from its slot. All the basic functionalities normally associated to the SIM card are managed by the terminal (GPRS connectivity, phone calls, SMS handling). NOTE It is possible that not all the services connected to the SIM card can be used or can be managed by the terminal.
DATALOGIC MEMOR™ 1 1.6 ACCESSORIES Cradles 94A151111 DL-Memor Single Cradle w Aux. Slot 94A151121 Dock Memor Vehicle w Power Adapter Batteries 94ACC1368 DL-Memor Standard Battery CVR2 94ACC1367 DL-Memor Large Capacity Battery CVR2 Power Supply 94ACC1324 PG5-30P35 AC/DC Power Supply EU/USA Plug 94ACC1334 PG5-30P35 AUS. Plug Adapter (10pcs) 94ACC1335 PG5-30P35 UK Plug Adapter (10pcs) 94ACC1339 PG5-30P35 EU.
CONNECTIONS 2 2 CONNECTIONS 2.1 USB CONNECTION You can use any standard mini USB cable to directly connect the Datalogic Memor™ to a host computer to transfer data through the USB interface. A C B Key: A) Host Computer B) Standard Mini USB cable C) Datalogic Memor™ Connection through the cradle is compliant to 2.0 USB standard. NOTE The Single Cradle can be connected to the Host by any standard mini USB cable to transfer data through the USB interface.
2 1 DATALOGIC MEMOR™ Connection through the cradle is compliant to 1.1 USB standard. NOTE The actual data transfer speed can be appreciably lower than the maximum theoretical speed.
CONNECTIONS 2.2 2 CONNECTION TO USB PERIPHERALS You can use a standard A (4 pin female) to mini A (5 pin male) USB cable to connect the Datalogic Memor™ to a keyboard or a memory. For all these devices maximum current withdrawal must be below 100mA.
2 1 DATALOGIC MEMOR™ The actual data transfer speed can be appreciably lower than the maximum theoretical speed.
CONNECTIONS 2.3 2 RS232 CONNECTION You can use a cable to directly connect the Datalogic Memor™ to a host computer to transfer data through the RS232 interface. A C B Key: A) Host Computer B) 94A051022 WIN-NET (HRS ST40X-18S-CV) C) Datalogic Memor™ The Single Cradle can be connected to the Host by any standard 9-pin serial null-modem cable for RS232 communications. Once the Host has been turned on, insert the Datalogic Memor™ mobile computer into the cradle.
DATALOGIC MEMOR™ 2 1 2.4 WLAN CONNECTION Datalogic Memor™ 802.11b/g radio models can communicate with the host using the on-board radio frequency component and an Access Point connected to the host computer. For models using the 802.11g radio, you can find information about the applet for radio configuration: http://www.summitdatacom.com/SCU.htm. To launch this utility you can tap the specific icon if it's visible on the taskbar or: 1.
CONNECTIONS 2 802.11g radio module is on by default, in order to avoid wasting energy, you can switch it off using the Wireless Communications applet. NOTE NOTE NOTE Suspending the terminal powers off the 802.11b/g radio and drops the radio connection. When the terminal resumes, depending on the radio power mode and security protocol selected, it may take up to 30 seconds for the 802.11b/g radio driver to re-associate the radio to the network.
DATALOGIC MEMOR™ 2 1 2.5 WPAN CONNECTION Datalogic Memor™ mobile computer models with Bluetooth® can communicate with other Bluetooth® enabled devices, such as a printer, within a range of 10 m, using the onboard Bluetooth® module. B A Key: A) Datalogic Memor™ B) Bluetooth® printer NOTE NOTE In order to avoid wasting energy, the Bluetooth® module is off by default. If you need to have Bluetooth® working, the module must be powered on using the Wireless Communications applet (see par. 3.7.
CONNECTIONS 2.6 2 WWAN CONNECTION Datalogic Memor™ GSM models enhance your connectivity solutions giving you an opening to an international wireless infrastructure that is the global standard. GSM (Global System for Mobile communications) is a digital mobile phone system based on TDMA; it utilizes the 850, 900, 1800 and 1900 MHz bands. In order to use a WWAN Connection you have to install a SIM Card∗ (see instructions on par. 1.5).
2 1 DATALOGIC MEMOR™ During a call, you can set the speaker volume by moving the joystick up and down. NOTE In case of heavy usage the Datalogic Memor™ could get warm, this is normal and does not mean a malfunction.
CONNECTIONS 2.
DATALOGIC MEMOR™ 2 1 2.8 WIRELESS AND RADIO FREQUENCIES WARNINGS WARNING WARNING WARNING Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Datalogic Memor™.
CONNECTIONS WARNING WARNING 2 An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If vehicle’s wireless equipment is improperly installed and the air bag inflates, serious injury could result. Turn off the device when in any area with a potentially explosive atmosphere.
DATALOGIC MEMOR™ 3 1 3 USE AND FUNCTIONING The use of the Datalogic Memor™ depends on the application software loaded. However there are several parameters that can be set and utilities that can be used to perform some basic functions such as data capture, communications, file management, etc. 3.1 STARTUP The Datalogic Memor™ turns on when the battery pack or the external supply is inserted. After the battery pack is installed, use the [ON/OFF] key to turn the mobile computer on and off.
USE AND FUNCTIONING 3 The mobile computer can also be awakened or turned off by the application program.
DATALOGIC MEMOR™ 3 1 3.1.1 Using the Stylus The stylus selects items and enters information. The stylus functions like a mouse. Tap: Touch the screen once with the stylus to open items and select options (Windows Mobile only). Double Tap: Touch the screen twice with the stylus to open items and select options (Windows CE only). Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items.
USE AND FUNCTIONING 3.1.2 3 Using the Joystick The joystick selects items and enters information. The joystick can work like the directional arrow keys of a PC keyboard or can function like a mouse and control the mouse pointer. It is possible to switch between the two functioning modes by pressing blue modifier + BKSP keys in sequence.
DATALOGIC MEMOR™ 3 1 3.2 WINDOWS MOBILE WELCOME WIZARD In Windows Mobile, at the very first Memor™ startup, following a clean boot or following a registry restore to default values, the mobile computer startup (see par. 3.1 is preceded by the Welcome Wizard. Welcome Wizard Screen The Welcome Wizard allows the user to calibrate the touch screen (see par. 3.7.5) and to configure an email account and a password to protect the terminal.
USE AND FUNCTIONING 3.3 3 DATA CAPTURE To capture data first of all select the barcode icon on the bottom-right side of the display and tap the 'Capture' menu item then proceed with the following directions. To configure and enable data capture parameters refer to par. 3.6. 3.3.1 Laser Data Capture To scan barcodes, point the Datalogic Memor™ laser model onto the code from a distance within the reading range while pressing the SCAN key.
DATALOGIC MEMOR™ 3 1 3.3.2 Imager Data Capture The Datalogic Memor™ Imager captures a picture of the entire bar code. The omni-directional scanning does not require that the operator orient the bar code to align with the scan pattern. To read a 1D or 2D code, simply point the Datalogic Memor™ Imager model onto the code and press the SCAN Key.
USE AND FUNCTIONING Linear barcode 3 2D Matrix symbol ÌBX3ÉÎ Relative Size and Location of Aiming System Pattern The field of view changes its size as you move the reader closer or farther away from the code. The field of view indicated by the aiming system pattern will be smaller when the Datalogic Memor™ Imager is closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit.
DATALOGIC MEMOR™ 3 1 3.4 DESCRIPTION OF THE KEYS The Datalogic Memor™ provides a 23-key alphanumeric keyboard + ON/OFF key + joystick. The following image shows this keyboard.
USE AND FUNCTIONING 3 Main Keys Function KEY FUNCTION It starts barcode data capture. The joystick lets you move forwards, backwards, upwards or downwards, scroll through a Menu list, browse among folder files or select functions if pressed down. It can work in two functioning modes: Arrow Keys Mode and Mouse Mode. It’s possible to switch between them by pressing blue modifier + BKSP keys in sequence (see par. 3.1.
DATALOGIC MEMOR™ 3 1 3.4.1 Resetting the Memor™ Windows CE There are several reset methods for the Memor™. A warm boot terminates an unresponsive application and clears the working RAM, but preserves both the file system and the registry. A cold boot forces all applications to close and clears working RAM and files not resident on the persistent flash memory. Registry is restored from persistent memory if available or returned to factory default.
USE AND FUNCTIONING 5. 3 Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the Clean Boot and proceed with a Cold Boot.
DATALOGIC MEMOR™ 3 1 necessary when the Windows Mobile operating system locks up and the warm boot command does not work. To perform a cold boot, press and hold the following keys simultaneously: Clean Boot A clean boot is a cold boot that causes the device to be restored to a clean configuration. The Memor will be reset to its factory configuration only if the user has not installed any additional package. Please note that you will lose any applications and data stored in persistent flash memory.
USE AND FUNCTIONING 3.5 3.5.1 3 STATUS INDICATORS LED Status The Datalogic Memor™ provides three different LEDs signaling the mobile computer status. LED STATUS Good Read and General Purpose (left side) Green It is constant for a configurable time to signal that a successful read has occurred. Green/Red It is also available to the application program. Green constant It is constant once the charging process has been completed. Red constant It is constant while charging.
DATALOGIC MEMOR™ 3 1 3.5.2 Taskbar The Taskbar provides information about the time, the battery level, the keyboard function, and the decoding status. ICONS DESCRIPTION Time and Battery Icons It displays the time. In Windows CE, they are representative of five different icons indicating the battery level. The icon is partially green when the power left is >20% and partially red colored when the power left is <20%. In Windows Mobile, it displays the system battery status.
USE AND FUNCTIONING 3 Windows CE Taskbar Windows Mobile Taskbars 39
DATALOGIC MEMOR™ 3 1 3.6 DATA CAPTURE CONFIGURATION From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down menu. Decoding can also be accessed from the Control Panel. By selecting the Info item from this drop-down menu you can access information about the Scanner and the Software; the Configure item opens the configuration applet (Data Capture Configuration Window), while Capture accesses the data capture applet (Data Capture Window), which enables code reading.
USE AND FUNCTIONING 3 Data Capture Configuration Window The screen format shows two columns where the left column indicates branches or parameters. Branches have three dots in the right column (...). You can navigate through the tree structure using the stylus or keyboard arrows directly on the item field or from the menu. Parameters have their corresponding current values in the right column. You can edit parameter values using the stylus or keyboard arrows directly on the item field or from the menu.
3 1 DATALOGIC MEMOR™ Reader Parameters The barcode reading parameters and values are dependent upon the type of scanner module mounted in your mobile computer. For a detailed list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. Scan Parameters The Scan Parameters are common to all scanner modules and allow control of the scanning device.
USE AND FUNCTIONING 3 Default Settings The following tables contain the default values for the major barcode setup parameters, according to the type of scan engine mounted on the mobile computer. For a complete list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD.
DATALOGIC MEMOR™ 3 1 BARCODE SYMBOLOGY SPECIFIC READER PARAMETERS MSI Plessey Code 93 Code 11 GS1 Databar GS1 Databar Omnidirectional GS1 Databar General GS1 Databar Limited GS1 Databar Expanded PDF - 417 Data Matrix QR POSTNET PLANET Japan Post Australia Post KIX Code Royal Mail Code (RM4SCC) ∗ LASER MODELS Disabled Disabled Disabled Disabled Disabled Disabled Not available Disabled Disabled Not available Not available Not available Not available Not available Not available Not available Not available
USE AND FUNCTIONING 3.6.2 3 Capture The Data Capture applet (Capture) enables code reading. Data Capture Window Data Capture can also be enabled through the Configuration applet by selecting File ->Scanner from the main menu, or by enabling the parameter Scan Always On in the Scan Parameters branch.
DATALOGIC MEMOR™ 3 1 3.7 CONTROL PANEL From the Windows CE Desktop, double tap on the "My Device" icon and then double tap on the "Control Panel" icon to open the Windows CE control panel main window. The Control Panel can also be launched from Start ->Settings >Control Panel. APPLET programs are displayed as icons; one icon corresponds to each APPLET. Windows CE Control Panel From the Windows Mobile Start menu, tap Settings. A three tab dialog opens: Personal, System, Connections.
USE AND FUNCTIONING 3.7.1 3 Buttons To configure the way up/down and the rest of keys control repeats, use the Up/Down Control applet (Start -> Settings -> Personal -> Buttons -> Up/Down Control). Windows CE Buttons Icon Windows Mobile Buttons Icon You can also select to wake up the terminal by the SCAN key. To assign desired applications to be launched by one of the keys, refer to DFU Reference Guide.
DATALOGIC MEMOR™ 3 1 3.7.2 Registry The REGISTRY ADMIN applet provides management of Windows CE 5.0/ Windows Mobile registry. From the Windows CE control panel main window, , select the REGISTRY ADMIN applet by double tapping the Registry Admin icon. From the Windows Mobile Start menu, tap Settings -> System ->Registry Admin. Select the REGISTRY ADMIN applet by tapping the Registry Admin icon. The Registry Administration Main window appears.
USE AND FUNCTIONING 3.7.3 3 Files Admin The FILES ADMIN applet enables control of the permanence of files in the Windows CE System Folder. Because Windows Mobile mounts the entire file system in persistent store (rather than using RAM), it provides both users and applications with a reliable storage platform even in the absence of battery power. The FILES ADMIN applet is therefore not necessary.
DATALOGIC MEMOR™ 3 1 - Select an installation file (for example, a .CAB cabinet file) from the Safe Setup mask. Safe Setup First Mask Then select \Windows or a relevant sub-directory in the path box. Then, Safe Setup will recognize the new files and directories present in the \Windows directory, and will copy them to the \Backup\Windows directory. At the next cold boot, these files will be restored (see par. 3.9). - Simply skip the first mask either by closing it or by pressing the ESC key.
USE AND FUNCTIONING 3.7.4 3 Wireless Communications The WIRELESS COMMUNICATIONS applet provides management of the 802.11b/g radio, the Bluetooth® and GSM modules. Windows CE Wireless Communications Icon Windows Mobile Connectivity Icon If the mobile computer supports Windows CE, select the WIRELESS COMMUNICATIONS applet by double tapping the Wireless Communications icon.
3 1 DATALOGIC MEMOR™ Windows Mobile Wireless Communications Window 52
USE AND FUNCTIONING 3.7.5 3 Stylus Calibration You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected). To recalibrate the touch screen on Windows CE, complete the following steps: 1. Select Start > Settings > Control Panel > Stylus to open the Stylus Properties dialog as shown in Figure 1. 2. Adjust Double-Tap sensitivity if needed or desired. 3. Select the Calibration tab to open the Calibration application.
DATALOGIC MEMOR™ 3 1 Figure 2 To recalibrate the touch screen on Windows Mobile, complete the following steps: 1. Select Start > Settings > System > Screen to open the Screen Settings dialog as shown in Figure 3. Figure 3 2. 3. 4. 5. 54 Tap Align Screen to open the Calibration screen shown in Figure 4. Carefully press and briefly hold stylus on the center of the target. Repeat as the target moves around the screen. Press the key at any time to cancel the stylus calibration.
USE AND FUNCTIONING 3 Figure 4 Startup stylus calibration on Windows CE When starting the terminal, a stylus calibration screen comes up if valid calibration settings are not available. This happens in the following circumstances: 1. 2. 3. 4. At the first startup of the terminal. After restoring registry default settings using the applet Registry Admin and performing a warm boot. After a Clean Boot. After a Firmware Update (see par. 3.10).
DATALOGIC MEMOR™ 3 1 3.7.6 Volume Settings Windows CE From the Windows CE control panel main window, select the Audio applet by double tapping the ‘Audio’ icon: The Audio applet allows to set the recording volumes of the main microphone and of the headset microphone. Also, it allows to set the headset volume when the user is listening to an audio file.
USE AND FUNCTIONING 3 From the Windows CE control panel main window, select the Volume & Sounds applet by double tapping the Volume & Sounds icon: The Volume & Sounds applet allows to manage the audio features of the rear speaker and appears as follows: Volume & Sounds Window 57
DATALOGIC MEMOR™ 3 1 Windows Mobile From the Windows Mobile Start Menu, select Settings > Connections tab and click the Audio icon: Audio Window The Audio applet allows to set the recording volumes of the main microphone and of the headset microphone. Also, it allows to set the headset volume when the user is listening to an audio file.
USE AND FUNCTIONING 3 To set the speaker volume during a call, click the icon on the right top of the Windows Mobile Start Menu. To set the front speaker or the headset speaker volume, use the right bar or move the joystick up and down. To set the rear speaker volume, use the left bar. To set the Bluetooth® headset volume, tap Settings > Connections > Bluetooth Manager > Connections and select the headset.
DATALOGIC MEMOR™ 3 1 3.8 WINDOWS CONNECTIONS To connect the Datalogic Memor™ to another device (i.e. Host PC) from Windows, several programs are available. These programs require specific electrical connections in order to function properly. 3.8.1 Microsoft® ActiveSync® ® ® Microsoft ActiveSync gives you the possibility to connect your desktop computer to your Datalogic Memor™ and synchronize the information on them.
USE AND FUNCTIONING 3 Visit the following Microsoft Web site for the latest in updates and technical information: http://www.microsoft.com/windowsmobile/activesync/default.mspx NOTE ActiveSync® Remote NOTE Microsoft® ActiveSync® Remote is no longer supported in Windows CE. For backward compatibility you can download it from the Internet. We suggest enabling the FTP Server and connecting to an FTP Client. See par. 3.8.4.
DATALOGIC MEMOR™ 3 1 3.8.2 Bluetooth® Manager Device Setup Windows CE Bluetooth® Manager Device Setup Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth-enabled devices are discoverable. 1. Open the Bluetooth® control panel by tapping Start > Settings > Connections tab > Bluetooth Manager. 2. Tap Settings. The Settings tab allows you to enable or disable the Bluetooth radio and specify settings for Incoming Connections. 3.
USE AND FUNCTIONING 3 To create a Bluetooth® partnership between your device and another device that has Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and within close range. 1. Open the Bluetooth® control panel by tapping Start > Settings > Connections tab > Bluetooth Manager. 1. Search for the type of Device(s) you want to connect to by tapping Printer, TM Serial or All. The Memor will search for Bluetooth® Devices within range. NOTE 3.
DATALOGIC MEMOR™ 3 1 To set up a connection: 1. From the list of available devices, double tap the one you want to activate, or select and then tap Connect. The resulting dialog will display services that are available on the device: 2. Select the service you want to connect to. The following table shows the icons that display for different types of service.
USE AND FUNCTIONING 3. 3 Tap OK to complete. The dialog will also appear when an Authentication request is received from another device. Once you have set up a Pairing, you can view the settings by double-tapping its name from the Connections tab. The Pairing info dialog will display different options, depending on what type of device you have selected and what service you use. • For a printer connection, tap the arrow to change the Virtual Port, or Delete to remove the device pairing.
DATALOGIC MEMOR™ 3 1 TM The icons displayed in the taskbar at the bottom of your Memor ’s screen will show you the state of the Bluetooth connection, as shown in the table below. Icon Name Disabled Icon Unpaired Icon Paired Icon Discoverable 66 Description Indicates that Bluetooth has been disabled. Indicates that the Bluetooth radio is on but the device is currently not paired to another. Indicates that the Bluetooth radio is on and the device is paired with at least another device.
USE AND FUNCTIONING 3 Windows Mobile Bluetooth® Manager Device Setup The Bluetooth Device Properties icon will only be visible if Bluetooth hardware has been installed on the unit. NOTE Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth-enabled devices are discoverable. 4. Tapping Start > Settings > Connections tab > Bluetooth Manager to open the Bluetooth® control panel. 5. Tap Settings.
3 1 NOTE DATALOGIC MEMOR™ By default, Bluetooth® is turned off. If you turn it on, and then turn off your device, Bluetooth® also turns off. When you turn on your device again, Bluetooth® turns on automatically. To create a Bluetooth® partnership between your device and another device that has Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and within close range. 2. Open the Bluetooth® control panel by tapping Start > Settings > Connections tab > Bluetooth Manager.
USE AND FUNCTIONING 3 To set up a connection: 1. Double tap the device you want to activate, or select and then tap Connect.
DATALOGIC MEMOR™ 3 1 2. Select the service you want to connect to. The following table shows the icons that display for different types of service. Icon Service Dialup Networking Printer File Transfer Protocol (FTP) Object Exchange (OBEX) Object Push (OPP) Object Exchange (OBEX) ActiveSync Human Interface Device (HID) - Keyboard Serial Virtual Port allows you to specify the incoming port, which is used to communicate serially with an incoming device just as if it were a physical COM port.
USE AND FUNCTIONING 3. 3 Tap OK to complete. The dialog will also appear when an Authentication request is received from another device. Once you have set up a Pairing, you can view the settings by double-tapping its name from the Connections tab. Tap the arrow to change the Virtual Port, or Delete to remove the device pairing. Tap Sync to initiate a Sync (available only if the service is an ActiveSync connection). 3.8.
DATALOGIC MEMOR™ 3 1 3.8.4 FTP Server Setup The Datalogic Memor™ Windows CE Operating System includes a sample File Transfer Protocol (FTP) server. FTP is used for copying files to and from remote computer systems over a network using TCP/IP. You can establish a connection to your Datalogic Memor™ using its FTP Server through the following interfaces: WLAN using the 802.11b/g radio Proceed as follows: 1. Create a registry file (extension .reg) to setup and enable FTP Server communication.
USE AND FUNCTIONING 3.9 3 BACKUP DIRECTORY FILE MANAGEMENT All of the Windows CE 5.0 system files reside in RAM (volatile memory) except for the Backup directory, which resides in FLASH (non-volatile memory). Therefore the contents of the Backup directory are persistent even if the mobile computer is re-booted or the battery pack is changed. You can save your more important files that you don't want to lose due to mobile computer re-boot, in the Backup directory or create a sub-directory within Backup.
DATALOGIC MEMOR™ 4 1 4 MAINTENANCE Rechargeable backup batteries and battery packs are not initially charged. Therefore the initial operation to perform is to charge them. See below. NOTE Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. CAUTION 4.
MAINTENANCE 4 Even if the storage temperature range is wider, In order to achieve the longest battery life, store the terminal and the spare batteries between 20 to 30 ºC (68 to 86 ºF). NOTE The Batteries must be charged at a temperature ranging from 0° to +40 °C (+32° to +104 °F). For the GSM models the maximum recommended temperature is + 35° C. At higher values the charging may slow down.
DATALOGIC MEMOR™ 4 1 4.2 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Turn off the Datalogic Memor™. 2. Press the latch release button and pull the battery latch down as indicated in the figure below: 3. Remove the cover and the battery pack. 4. Install the new battery pack, first insert the bottom (contacts) side, then the upper side as indicated in the following figure: 5.
MAINTENANCE 4 As the battery cover is lifted, the mobile computer automatically shuts off, in order to retain data during the pack substitution.
4 1 DATALOGIC MEMOR™ Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause WARNING serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion.
MAINTENANCE 4 Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to WARNING generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids.
4 1 4.3 DATALOGIC MEMOR™ CLEANING THE MOBILE COMPUTER Periodically clean the Datalogic Memor™ with a slightly dampened cloth.
TECHNICAL FEATURES 5 5.1 5 TECHNICAL FEATURES TECHNICAL DATA Datalogic Memor™ Common Features Electrical Features Power DC Supply Battery Pack 5 V ± 5% 1 cell Li-Pol or Li-Ion 1100 mAh@3.7 V (nominal) Alternatively 1 cell Li-Pol or Li-Ion 2000 mAh@3.7 V (nominal) Internal Backup Battery Rechargeable Ni-MH 30 mAh (2 x 15 mAh cells) Communication Features Bluetooth® Interface Serial Interface RS232 USB 1.
5 1 Hardware Features FLASH RAM Microprocessor Audio LEDs Display Keyboard Mechanical Features Dimensions (LxWxH) Weight (depending on model) Programming Features Operating system Laser Models Decoded barcodes 1D Imager Models Decoded barcodes 1D DATALOGIC MEMOR™ 256 MB 128 MB Marvell PXA 310 624 MHz Rear Speaker for beeps and ringing tones Microphone and Front Speaker for phone calls Headset Two-color Good Read/Programmable Charging Status 64K Color TFT LCD with 320 x 240 pixel resolution (QVGA), wit
TECHNICAL FEATURES 5 Datalogic Memor™ Optical Features Maximum resolution Skew angle Pitch angle Scan rate - bidirectional Light source laser scanner Safety class EN 60825-1:2001 Datalogic Memor™ 1D Models 0.10 mm / 4 mils ± 50° ± 65° 104 ± 12 scan/sec VLD, wavelength 630~680 nm Laser: Class 2 Led (Green Spot): Class 1 Maximum resolution Scan rate Aiming Laser Safety class EN 60825-1:2001 Illumination System Datalogic Memor™ 2D Models 0.
DATALOGIC MEMOR™ 5 1 5.
TEST CODES 6 6 TEST CODES High Density Codes 0.
DATALOGIC MEMOR™ 6 1 Medium Density Codes 0.
TEST CODES 6 Low Density Codes 0.
DATALOGIC MEMOR™ 6 1 2D Codes Datamatrix ECC200 Example Inverse Datamatrix ECC200 Example 88
GLOSSARY Access Point A device that provides transparent access between Ethernet wired networks and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile computers, PDAs or other devices equipped with radio cards, communicate with wired networks using Access Points (AP). The mobile unit (mobile computer) may roam among the APs in the same subnet while maintaining a continuous, seamless connection to the wired network.
GSM Global System for Mobile communication. It is a standard for digital cellular communications, currently used in the 900 MHz and 1800 MHz bands. Host A computer that serves other mobile computers in a network, providing services such as network control, database access, special programs, supervisory programs, or programming languages. Liquid Crystal Display (LCD) A display that uses liquid crystal sealed between two glass plates.
INDEX A Accessories; 10 ActiveSync® Remote; 61 B Backup Directory File Management; 73 Bluetooth® Manager Device Setup; 62 Buttons; 47 L Laser Safety; vii LED Class; xiii M Maintenance; 74 Micro SD Card Insertion; 5 Microsoft® ActiveSync®; 60 Models Description; 2 O C Charging the Batteries; 74 China RoHS Pollution Control Logos; xix Cleaning the Mobile Computer; 80 Connection Cables; 21 RS232 Direct Connection; 21 Connections; 11 Connection to USB peripherals; 13 Control Panel; 46 Conventions; v D Data Ca
Test Codes; 85 U USB Connection; 11 Using the Joystick; 27 Using the Stylus; 26 V Volume Settings; 56 92 W WEEE Compliance; xvii Windows Connections; 60 Windows Mobile Bluetooth® Manager Device Setup; 67 Windows Mobile Phone; 71 Windows Mobile Welcome Wizard; 28 Wireless and Radio Frequencies Warnings; 22 Wireless Communications; 51 WLAN Connection; 16 WPAN Connections; 18 WWAN Connections; 19
Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 - Lippo di Calderara Bologna - Italy 09 dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el DL-MEMOR modelli con funzionalità radio 802.11g+BT models with 802.11g+BT radio feature modèles avec 802.11g+BT radio intégrés modelle mit 802.11g+BT radio-funktionalität modelos con funcionalidad radio 802.
EN 62311:2008 : ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ).
Datalogic Mobile S.r.l. Via S.
ETSI EN 301 511 V9.0.2, MARCH 2003 : EN 55022:2006 (CLASS B) + A1:2007 : GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS (GSM); HARMONIZED EN FOR MOBILE STATIONS IN THE GSM 900 AND GSM 1800 BANDS COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.
Datalogic Memor™ www.mobile.datalogic.com World wide Sales Network available from: www.mobile.datalogic.com/contacts Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147561 User’s Manual 822000890 ©2009 Datalogic Mobile S.r.l.
