User's Manual

INSTALLING A MICROSD CARD
1. Turn off the Memor X3.
2. Press the latch release button and pull the latch
down; then remove the cover and the battery pack:
3. Open the microSD card slot by lifting up the locking
plate:
4. Shift the cardholder upwards and then pull it up:
5. Insert the microSD card with the written part
upward:
6. Lock the card into place by pushing the cardholder
down and then shifting it downwards; push the
locking plate down:
7. Reinsert the battery cover (see section GETTING
STARTED)
SCANNING AND IMAGING
Laser Data Capture
2D Imager Data Capture
Linear barcode 2D Matrix symbol
ÌBX3ÉÎ
Relative Size and Location of Aiming System Pattern
Linear Imager Data Capture
Scanning with a Memor X3 Linear Imager
When beams reflect directly back into the scanner from the bar
code, they can “blind” the scanner and make decoding difficult.
To avoid this, don’t keep the terminal perpendicular to the
barcode: moving it of a small angle of ±2° is usually enough to
enable proper reading. But don’t scan at too oblique an angle
either: keep the scanner within an angle of ±30° from the
perpendicular to the barcode in order to guarantee effective
scanning.
Side Views
REFERENCE DOCUMENTATION
For further information regarding Memor X3 refer to the SDK
Help on-line and to the Memor X3 User’s Manual.
For information regarding safety and regulatory refer to the
Safety and Regulatory Addendum or to the dedicated section of
the Memor X3 User’s Manual.
PATENTS
This product may be covered by one or more of the following
patents:
Design patents: AU310182, EP0469143, EP1582024,
EP2247700, HK0601962.6, JP1325117, KR30/0466667,
TWD118829, USD574830, USD643034, USD658174,
ZL200630124857.0
Utility patents: EP0681257B1, EP0789315B1, EP1128315B1,
EP1396811B1, EP1413971B1, IT1396943, US5992740,
US6808114, US6997385, US7387246.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical
support through its website.
Please check our website at www.datalogic.com under
“Support & Services”, then “Automatic Data Capture”, and
click on the links indicated for further information including:
- Downloads
- Manuals for the latest versions of user manuals and
product guides.
- Software & Utilities for the latest firmware release for
your product. You can also click on the following link
for direct access to this section:
www.datalogic.com/products_updates.
- Service Program for warranty extensions and
maintenance agreements.
- Repair Centers for a list of authorised repair centers.
- Technical Support Automatic Data Capture email
form to contact our technical support
WARRANTY TERMS AND CONDITIONS
The warranty period is 1 year for the device and 90 days for
consumables (e.g. battery, power supply, cable etc.) from
date of purchase at our company.
©2013 Datalogic ADC S.r.l. • ALL RIGHTS RESERVED. • Protected
to the fullest extent under U.S. and international laws. • Copying, or
altering of this document is prohibited without express written
consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.
All other brand and product names mentioned herein are for
identification purposes only and may be trademarks or registered
trademarks of their respective owners.
Specular reflection.
Reflected beam
is within specular
dead zone and
prevents decode.
No specular
reflection.
Decode can
occur.
Tilt Bar Code At Slight Angle (Up to 30°)
Light
Source
Light
Source