manual
Table Of Contents
- PowerScan™ BT8300 Family Industrial Handheld Bar Code Reader with Bluetooth® Wireless Technology
- Quick Reference Guide
- Table of Contents
- PowerScan™ BT8300 Reader
- Using the PowerScan™ BT8300
- Installing the Battery Pack
- Setup
- Connecting the PowerScan BT8300
- PowerScan™ BT8300 Default Configuration
- Technical Features
- Reading Distance
- Warranty
- Service and Support
- Compliance
- Hex/Numeric Table
Connecting the PowerScan BT8300
Quick Reference Guide 9
Connecting the PowerScan BT8300
Overview
PowerScan™ BT8300/BC 8030-BT Configuration
1. Connect a BC 8030-BT cradle to the Host. For installation and connec-
tion information see the BC 8030-BT Quick Reference Guide.
2. Charge the PowerScan BT8300 battery using a BC 8030-BT, the
CHR-PM80 or BC-P080 chargers as described in this Quick Reference
Guide. A full charge takes 4 hours if using an external power supply;
while it takes up to 10 hours if supplying power through the USB port.
3. Configure the reader as described in this Quick Reference -
Linking the PowerScan™ BT8300 to the BC 8030-BT Cradle on
page 10.
4. Configure the BC 8030-BT cradle. See BC 8030-BT Configuration in
the BC 8030-BT Quick Reference.
- OR -
PowerScan™ BT8300/Bluetooth-Enabled PC Configuration
1. Install any drivers provided with the Bluetooth adapter.
2. Charge the PowerScan™ BT8300 battery using a BC-8030-BT, the
CHR-PM80 or the MC-P080 chargers as described in this Quick Refer-
ence Guide. A full charge takes 4 hours if using an external power supply;
while it takes up to 10 hours if supplying power through the USB port.
3. Configure the reader as described in this Quick Reference -
Linking the PowerScan BT8300 to a Bluetooth-Enabled PC on
page 13.