manual
Table Of Contents
- PowerScan™ BT8300 Family Industrial Handheld Bar Code Reader with Bluetooth® Wireless Technology
- Quick Reference Guide
- Table of Contents
- PowerScan™ BT8300 Reader
- Using the PowerScan™ BT8300
- Installing the Battery Pack
- Setup
- Connecting the PowerScan BT8300
- PowerScan™ BT8300 Default Configuration
- Technical Features
- Reading Distance
- Warranty
- Service and Support
- Compliance
- Hex/Numeric Table
Installing the Battery Pack
Quick Reference Guide 7
Charging the Batteries
Once the BC 8030-BT/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan
™
BT8300 into the BC 8030-BT cradle or the C-8000
battery charger. The Reader LED on the cradle/battery charger turns red.
The battery is completely charged when the Reader LED on the cradle/battery
charger turns green.
Figure 1.
Changing the Batteries
Do not incinerate, disassemble, short terminals or expose to high
temperature. Risk of fire, explosion. Use specified charger only.
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of the batteries as required by the relevant laws in force.
WARNING
1
2