Spec Sheet

www.datalogic.com
POWERSCAN™ PD9530-DPM
FEATURES
INDUSTRY-APPLICATIONS
DPM TECHNOLOGY
Direct Part Marking (DPM) is a process
that allows users to imprint a bar code
directly on an item instead of printing
the code on a paper label. Different
technologies are available to directly mark
objects: laser / chemical etching, dot
peening and ink jet printing. Each of these
methods have specific advantages and
disadvantages in terms of durability, cost
and ease of reading.
The PowerScan™ PD9530-DPM reader is a
rugged handheld area imager specifically
addressed and capable of reading codes
marked with DPM.
READING CAPABILITIES
The PowerScan PD9530-DPM imager
includes the latest optics and software
from Datalogic to make the reading of
codes with DPM easy and intuitive. The
typical reading distance is from contact
to 4-5 cm / 1.5-1.9 in, depending on the
DPM technology used, the code resolution,
and the material and surface type.
The scanner is also capable of reading
standard bar codes printed on labels. It is
based on a high density optic which allows
the capture of very small, high-resolution
codes in a range from near contact up to
15.0 cm / 5.9 in.
ILLUMINATION
The intuitive aiming system allows
the highest first-pass reading rate.
Additionally, the PowerScan 9530-DPM
area imager uses a soft-pulsed white
illumination light resulting in reduced
flashes, which is very gentle on users’
eyes.
MOTIONIX™ MOTION-SENSING TECHNOLOGY
Datalogic’s Motionix™ motion-sensing
technology detects the natural actions of
the operator to automatically switch the
scanner into the desired scanning mode.
• Supports any kind of DPM
• Highly visible 4-dot aimer with center cross for
targeted scanning
• New ‘soft-pulsed white’ illumination light
• Datalogic’s 3GL™ (3 Green Lights) technology and
loud beeper for good read feedback
• Datalogic’s Motionix™ motion-sensing
technology
• Ergonomic shape provides hours of tireless data
collection for the user
• Supports 1D, stacked and 2D codes, postal codes
and image capture
• Water and Particulate Sealing Rating: IP65
• Manufacturing Shop Floor: Work-
in-Progress; Sub-Assembly;
Component Tracking; Quality
Control; Time and Cost Analysis;
Line Inventory Control