User Manual

Enter/Exit Programming Mode

250

PowerScan™ PD9530/PBT9500/PM9500

Enable/disable buttons

This feature offers the ability to enable or disable the keypad.

Figure 6. PowerScan 9500 Keypad Models

16-key keypad

4-key keypad

Key Programming

$CPWFZFFFF\r

All keys enabled

DEFAULT

$CPWFZ0000\r

All keys disabled

$CPWFZ

Enable a combination of keys (4-key models only)

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code at

ft followed by 4 digits from the Alphanumeric charac-

ters in

Appendix D, Keypad

4-key models only

: The last 3 digits must always be 0;

the 4 bits of the first digit must be 1 if the corresponding

key is enabled; the four bits represent, starting from the

highest: Arrow Up, F2, F1, Arrow Down. End by scanning

the ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code to abort and

not save the ent

ry string. You can then start again at the

beginning.

CANCEL